Philips DVDR3455H Connecting the audio cables, This connection enables you to listen to the sound

Step 1: Basic Recorder Connections (continued)

VIDEO (CVBS)	INPUT	OUTPUT	VIDEO (CVBS)	PR	COMPONENT	Y
EXT 1		DVD RECORDER 22F8			VIDEO
	L	OUT 1

TV-OUT ANTENNA-IN R

LISTED

	R	Complies with 21 CFR	OUT 2
		1040.10 and 1040.11
EXT 2	AUDIO		S-VIDEO (Y/C)	COAXIAL	3	AUDIO
S-VIDEO (Y/C)				(DIGITAL AUDIO)

English

Option 2

DIGITAL IN

AV amplifier/ receiver

Option 1

OR

TV

Connecting the audio cables

This connection enables you to listen to the sound.

Option 1: Using an audio cable

You can connect the recorder to a two channel stereo system or receiver in order to enjoy the stereo sound system.

Use the supplied audio cable (red/white plugs) to connect the AUDIO OUTPUT jacks to these devices with the same input jacks.

Option 2: Using a coaxial cable

You can connect the recorder to an AV amplifier/receiver in order to enjoy multichannel surround sound.

Use a coaxial cable (not supplied) to connect the COAXIAL (DIGITAL AUDIO) jack to the digital input on the AV amplifier/receiver (with a digital multichannel sound decoder).

Before you start operating, set the audio settings accordingly (see “Setup Menu Options – AUDIO settings.)

If the AUDIO settings do not match your amplifier’s capabilities, the amplifier may produce a strong, distorted sound or no sound at all.

Helpful Hint:

–Do not connect your TV’s audio output jacks to the AUDIO L/R (IN-EXT) jacks on this recorder, this may cause unwanted noise.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

17