| Troubleshooting (continued) |
|
|
Problem (Playback) | Solution |
Disc does not play. | – Insert the disc with the label facing up. |
| – Wrong region code. The DVD must be coded for ALL regions |
| or Region 1 in order to play on this recorder. |
| – There is no recording on the disc or it is not a supported type |
| of disc. Read chapter “Playback from Disc - Playable discs” for |
| details. |
| – Make sure the disc is not scratched or warped. Clean the disc |
| or replace a new one. |
| – Check if the disc is defective by trying another disc. |
English
The picture is distorted or black and white during playback.
There is picture or sound interference with the TV reception.
Distorted sound coming from a connected
The message ‘UNKNOWN DISC’ appears.
The recorded DVD cannot be played back on another DVD player.
–The disc does not match with the TV color system standard (PAL/NTSC).
–The disc is dirty, clean the disc.
–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
–Have your antenna or cable TV signal checked.
–
–Do not connect any cables from the recorder to the ‘Phono’ input of your amplifier.
–If you are playing a DTS CD, you have to connect the COAXIAL jack of this recorder to a
–This message may appear if you insert a disc that may have encountered one of the following:
–Error during recording: The title may be missing.
–Error while changing the title/index picture: The original title/ index picture may be visible.
–Error while finalizing or the disc has not been finalized.
–If a recording is too short, it is possible that a DVD player/ recorder cannot detect it. Please observe the following ‘minimum recording times’. Mode of record quality: {High Quality - HQ} – 5 minutes, {Standard Play - SP} – 10 minutes, {Standard Play Plus - SPP} – 13 minutes, {Long Play - LP} – 15 minutes, {Extended Play - EP} – 20 minutes, {Super Long Play - SLP} – 30 minutes, {Super Extended Play - SEP } – 30 minutes.
77