GETTING STARTED
Power Connection
AC Power
This unit runs on AC 120V power.
Plug the AC Power Cord into a 120V household electrical wall outlet.
Do not connect the power plug to a power outlet oth- er than that which is indicated here or on the label as this may result in the risk of fire or electric shock.
Do not handle the power plug with wet hands. Doing so may cause electric shock.
Battery Backup
The battery backup function maintains the clock time should the AC power be interrupted. When power is restored, the correct time will be displayed.
The battery compartment is located on the bottom of the unit. Load 3 x CR2025 lithium batteries (not included) in the battery compartment. Make sure that the positive (+) and negative
The time will not be displayed nor will any functions be available during power failure. Battery backup maintains the time, only.
Reset
To reset the unit, press the RESET button located on the rear of the unit (behind the projectors. Reset the unit if it is not performing as expected and whenever the remote temperature sensor’s batteries are changed. Resetting the unit will return all settings to their
Page 10 | Coby Electronics Corporation |
|
|