CLOCK/ALARM Mode

Setting the Clock Time and Date

It is not necessary to set the clock time unless you cannot receive the RCC synchronization signal. If you cannot receive a signal, or if you want to set your clock manually, set the Clock Set options.

To set the Clock Set options:

Hold the CLOCK SET button for 2 seconds to enter Clock Set mode. Press the CLOCK SET button again to cycle through the Clock Set options.

To change an option value, press UP or DOWN. When you have finished setting an option, press CLOCK SET to move on to the next option.

The Clock Set options are: Language, Year, Month, Day, 12/24H, Time Zone, RTC Hour, RTC Minute.

Clock Option	Settings

Language	ENG (English), GER (German), FRE (French),
	SPA (Spanish), ITA (Italian).
	 Default: ENG
Year (YR)	2000 to 2099
	 Default: 2005
Month (M)	1 to 12 (January to December)

Date (D)	1 to 31

12/24H	Select 12H or 24H time display

Hour	Set the current clock hour

Minute	Set the current clock minute

The week day will be automatically calculated once the Year, Month, and Date are set.

Page 12	Coby Electronics Corporation