Kompernass KH 2023 manual Alarm wake-up function

LCD display.

•The current setting HH.MM (hours:minutes) and the day of the week display start to flash.

•Use »UP« to adjust the setting in increments of 1 minute.

•Use »DOWN« to adjust the setting in decrements of 1 minute.

•Keep the »UP« or »DOWN« button pressed to change the time quickly in 10 minute increments or decrements.

•Press »SNOOZE« to change the alarm operation cycle between daily (all seven days of the week) and

weekdays (Monday to Friday).

• Press the »AL. 1« or »AL. 2« button again to select either a music or tone wake-up alarm.

Wake-up type	LCD display (on right in display)
Wake-up tone	Symbol 'BELL 1'
Radio	Symbol 'MUSIC 1'
Off	Nothing displayed

Note: The alarm wake-up function is only activated if one of the two wake-up types (music or tone) is set.

•If within 15 seconds, there has been no further setting made then the current settings are activated and the

device goes back into automatic operation.

2.8 Alarm wake-up function

•When the actual time (clock) and the set alarm wake-up time are identical, the alarm wake-up function is switched on.

•When the alarm switches on, then the Sleep Timer, if in operation, is immediately ended.

•Alarm with wake-up tone,

a)4.5 kHz wake-up tone sounds

b)Radio is silenced, even if it is switched on.

c)The wake-up tone sounds for 10 minutes.

•Alarm with radio,

a)The radio switches itself on (the last selected station)

b)The radio plays for a maximum of 60 minutes

• By pressing the »SNOOZE/RADIO OFF« button you can put off the alarm wake-up by 9 minutes (Snooze alarm function). The wake-up function is interrupted and resumed after 9 minutes.

•To stop the alarm wake-up, press the appropriate »AL.1« or »AL. 2« button.

11