2.9 Selecting radio presets
•There are 10 presets for each radio band.
•Each button can have two presets. In order to call up the other preset, just press the button a second time.
•If the radio is switched on, press the station presets 1/6. The display shows 'MEM' steadily, the frequency of preset 1 appears steadily on the LCD and '1' appears steadily on the 'MEM display.
•To select the required preset station, press the appropriate button 1/6, 2/7, 3/8, 4/9 or 5/10.
•The radio is silenced (MUTE) during the preset setting process. If the input of new preset data is interrupted for 1 second, then the preset selection is accepted, the radio changes to the corresponding frequency and the muted mode ends.
2.10 Storing radio stations
•Press »MEMORY« once to save the frequency of the radio station currently being received. The 'MEM' display starts to flash.
•The particular preset is determined by pressing once or twice on the appropriate preset station button.
The number of the selected preset is shown on the 'MEM display.
•Press »MEMORY« again to initiate the preset process. The 'MEM' display shows steadily.
•When the 'MEMORY' display is flashing you can use »UP«, »DOWN« or »MEM. SCAN« to search up and down through the presets. The 'MEMORY' display is no longer shown.
2.11 Station search manual /search process
•If the radio is on, press »UP« to increase the reception frequency manually (for step sizes, see frequency steps column in the table).
•Press »DOWN« in order to change the reception frequency downwards (by a step at a time).
•Keep pressing on to »UP« or »DOWN« button for an automatic search (search process) for the nearest receivable radio station.
12