Directed Video HD1020 manual System

System

Laser (If DVD is installed)	Semiconductor laser
Signal Formats	NTSC, PAL
Audio Characteristics
Frequency Response	DVD Video (PCM@ 96kHz)	20 Hz - 40 kHz ± 1dB
(If DVD is installed)
	DVD Video (PCM@ 48kHz)	20 Hz - 20 kHz ± 1dB
	CD	20 Hz - 20 kHz ± 1dB
Signal-to-Noise Ratio	90dB
Harmonic Distortion	0.01%
Dynamic Range	DVD Video	95dB
(If DVD is installed)
	CD	95dB
Line level A/V outputs
Audio (RCA jacks)	2 Vrms
Video (RCA jack)	1 V p-p @75 ohms
Line level A/V inputs
Audio (RCA jack)	2 Vrms
Video (RCA jack)	1 V p-p
General
Power Requirements	14.4 VDC, 3.35 amps	5A fuse
Power Consumption	42.6 watts
Dimensions	345 mm x 65 mm x 282 mm	15.25 in. x 3 in. x 18.75 in.
	(length/height/width)	(length/height/width)
Mass	2.3 kg	3 lbs
Operating Temperature	0°–50°C	32°–120°F
Operating Humidity	10% to 90%

NOTE: Specifications and design are subject to change without notice.

NOTE: The unit will automatically power off once the ACC is turned off (ignition key off). Ensure that the RED (+ACC) wire is connected to ACC power.

© 2006 Directed Electronics—all rights reserved 35