Note: To set the time to auto turn on the home docking station is the same as setting the alarm time above. (see step 2)
AUTO TURN OFF / SLEEP (Can only be set while the home dock is powered on)
Auto turn off (Sleep mode) can only be set when the docking station is powered on and working (except alarming). Press and hold Push SLEEP (VOLUME) button until 15 MIN appears in the home dock screen. Pushing and releasing the VOLUME button will step through 15, 30, 35, 60, 90, 120 Minutes and OFF
When SLEEP is activated the word SLEEP is displayed in the lower left corner of the home dock LCD display.
2) Setting the alarm time
Press and hold DSP button on the docking station panel will enter the alarm time setting mode. Like setting the clock, press SEL button to select hour or minute, then rotating VOL UME knob to adjust the hour or minute’s value.
To console the alarm, just press and hold DSP button to open the alarm time, then press and hold DSP again to console.
Note:
a. When alarming, press any button (except the VOLUME knob) to stop alarming.
b. When alarming, Press SNOOZE(VOLUME) button will stop alarming for two sec- onds. After two seconds will alarm again.
3) Auto turn on/off the docking station
When the docking station is not on working, shortly press DSP button on the dock- ing station panel to set the time of auto turning on the docking station. When the docking station is on working (except alarming), press and hold Push SLEEP (VOL- UME) button on the docking station panel to set the time of auto turning off the docking station.
Note: To set the time of auto turning on/off the docking station is like to setting the clock.
Other Operation
1) EQ
Shortly press EQ button on docking station panel to to turn on qualization function
30 | © 2006 Directed |