Inmotion IM510 Mobile Audio

Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand. In all kinds of environments, in every price range, Altec Lansing offers sound of distinction — giving even the most demanding customers the audio enjoyment they seek. Just listen to this!

BOX CONTENTS

•inMotion iM510 mobile speaker system

•Power supply

•Sansa docking adapters

•3.5 mm stereo cable

•Protective carry bag

•User’s guide and quick connect instructions

MADE FOR:

•Sansa C200 Series

•Sansa E200 Series

PLACING THE INMOTION IM510

Position the inMotion iM510 on a level surface, preferably close to you (within three feet).

ASSEMBLING THE INMOTION IM510

Open the inMotion iM510 docking bay by pushing the button located on the speaker grille. Connect the Sansa player to the inMotion iM510 by plugging the docking bay connector into the Sansa player port. If the Sansa player feels too loose inside the docking bay, remove it, and use a docking adapter (included) to reduce the depth of the docking bay. The docking adapters can be connected to the docking bay by inserting the small tab on the back of the adapter into the fitted space on the docking bay. The Sansa player should fit snugly inside the adapter.

Note: Alternate audio sources — such as non- dockable MP3 players, CD players, portable DVD players, and laptops — can also be connected to the inMotion iM510. For more information, see the “Connecting to alternate audio source” section.

POWER

Use one of the following two options to power your inMotion iM510:

AC (Wall outlet) Power

Insert the barrel connector from the power supply into the DC connector on the rear of the inMotion iM510. After this connection is made, insert the power supply into a wall outlet.

DC (Battery) Power

Install four AA batteries (not included) into the battery compartments on the bottom of the inMotion iM510 (two to each compartment). Make sure the batteries are installed as illustrated in the battery compartments.

START PLAYING

1.Turn on your Sansa player.

2.Turn on the inMotion iM510 by pushing the power button located on the top of the unit. A blue LED will light around the button when the power is on.

Note: To avoid hearing a popping sound when you turn on your inMotion iM510, always turn on your audio source first. When listening to FM radio, remember to leave the headphones plugged in, as they act as the antenna for the FM radio.

POWER OFF

Turn off the inMotion iM510 by pushing the power button located on the top of the unit. The LED will turn off.

AUTO SHUT-DOWN (STANDBY)

During battery-only operation the inMotion iM510 automatically shuts down/goes into standby mode if no audio is detected for three minutes. While this mode reduces battery consumption, it does not completely turn the inMotion iM510 off. To maximize battery life when not using the inMotion iM510, push the power button located on the top of the unit. The LED will turn off.

NOTE: The Auto Shut-down (Standby) feature is active during battery-only operation. If the AC wall adapter is used, the inMotion iM510 will remain on as long as the power switch is in the “On” position.

SYNCING

The inMotion iM510 is equipped with a pass- through feature that allows you to sync your Sansa player with your computer while the Sansa player is docked. To sync your Sansa player with your computer, follow the steps below: