3. Dual units, balance.d, between p~eamplifier and amplifier(s)
Connect the left channel balanced output of your preamplifier to the balanced input on the left channel B.A.F. Connect the balanced output of the left B.A.F to the left balanced input of the power amplifier.
Do the same for the right channel.
Operate your system in the same manner as before the B.A.F.s were
installed. ~.~
4.Dual units, balanced or
Connect the left channel Tape output of your preamplifier to the input of the left channel B.A.F. Do the same for the right channel. Connect the output of the left channel B.A.F. to the left channel Tape i or 2 input of your preamplifier. Do the same for the right channel.
When listening to the B&W speakers, the Tape Monitor should be set to the position corresponding to the output return from the B.A.F. The Input Selector is used to select a source for listening.
Caution: With this configuration the Input Selector must meve~ be set to the input connected to the B.A.F. output. This will create a feedback loop that can damage other system components.
5. After
There is no ON/OFF switch on the B.A.F. It was designed to be left on at all times. The unit will draw less than i0 watts from the AC powerline.
6.Turn the other system components on, remembering that the amplifier is always the last component to be energized.
7.Enjoy