Haier HSU-09RS03/R2(SDB) Health Operation Health Airflow Operation, Setting, Health airflow

Operation

HEALTH Operation HEALTH AIRFLOW Operation

AM

SMART

The anion generator in the

airconditioner can generate a

lot of anion effectively balance

the quantity of position and anion in the air and also to kill bacteria and speed up the dust sediment in the room and finally

clean the air in the room.

Press HEALTH button

For each press, is displayed Air conditioner starts health anion function operation.

		The setting of
		health airflow
		function
	1).Press the button of health airflow,
	appears on the display. Avoid
	the strong airflow blows direct to
AM	the body.
	2).Press the button of health airflow
SMART	again,	appears on the display.
	Avoid the strong airflow blows
	direct to the body.

The cancel of

the health airflow function

Press the button of health airflow again, both the inlet and outlet

grills of the air conditioner are opened, and the unit goes on working under the condition before the setting of health airflow function.

After stopping, the outlet grille will close automatically.

Press HEALTH button for twice press,

disappears,the operation stops.

Notice:

Cannot pull direct the outlet grille by hand. Otherwise,the grille will run incorrectly. If the grille is not run correctly, stop for a minute and then start, adjusting by remote controller.

Remote controller can memorize each operation status. when starting it next time, just press ON/OFF button and unit will run in previous status.

When indoor fan motor is running, it has healthy process function. (It’s available under any mode) When the fan in the indoor unit does not work, the health lamp lights up, but the anion generator does not release anion.

Note:

1.After setting the health airflow function, the position of inlet and outlet grills is fixed.

2.In heating, it is better to select the mode. 3.In cooling, it is better to select the mode.

4.In cooling and dry, using the air conditioner for a long time under the high air humidity, a phenomenon falling drips of water occurs at the outlet grille .

5.Select the appropriate fan direction according to the actual conditions.

6