Comfortable Sleep, Operation Mode | Haier HSU-12RS03/R2(SDB)

Operation

Comfortable SLEEP

Before going to bed,you can simply press the SLEEP

button and unit will operate in SLEEP mode and bring you a sound sleep.

3 hours then stops. Temp. is lower than temp. setting so that room temperature won’t be too high for your

sleep.
Temp.setting	Unit stop

AUTO

SMART

Press SLEEP

button.

Operation Mode

1.In COOL,DRY mode

1 hours after SLEEP mode starts, temp.will become 1O C higher than temp.setting. After another 1 hours, temp. rises by 1O C further. The unit will run for further 6 hours then stops Temp.is higher than temp. setting so that room temperature won’t be too low for your sleep.

	1 hr	Decreases 2 O C
	1 hr	Decreases 2 O C
		Decreases 2 O C
			3 hrs
		3 hrs	Rises 1 O C

SLEEP			SLEEP
operation starts			operation stops

In HEAT mode

3.In SMART mode

The unit operates in corresponding sleep mode, which adapted to the automatically selected operation mode.

4.When quiet sleeping function is set to 8 hours the quiet sleeping time can not be adjusted.When TIMER function is set,the quiet sleeping function can't be set up.After the sleeping function is set up,if user resets TIMER function, the sleeping function will be cancelled;

SLEEP	SLEEP
operation starts	operation stops
	Approx.6hrs
1 hr	Rises 1O C
1 hr	Rises 1 O C
1 hr
Temp.setting	Unit stop

In COOL, DRY mode

2.In HEAT mode

1 hours after SLEEP mode starts,temp will become 2O C lower than temp.setting. After another 1 hours, temp decrease by 2 O C further. After more another 3 hours, temp. rises by 1O C further. The unit will run for further

the machine will be in the state of timing-on,if the two modes are set up at the same time, either of their operation time is ended first ,the unit will stop automatically, and the other mode will be cancelled.

Power Failure Resume Function

If the unit is started for the first time, the compressor will not start running unless 3 minutes have elapsed. When the power resumes after power failure, the unit will run automatically, and 3 minutes later the compressor starts running.

Note to the power failure resume:

press the sleep button ten times in five seconds and enter function after hearing four sounds.And press the sleep button ten times within five seconds and leave this function after hearing two sounds.

Operation