Targus ACP60US Connecting a PDA, Connecting to a Local Area Network, Connecting a USB Device

Targus ExpressCard Notebook Docking Station with Digital Video and Audio

Connecting a PDA

1.Attach the cable connector to the serial port on the docking station.

2.Verify that the COM port setting, in either your HotSync® or

ActiveSync® software, matches the setting on the docking station. To verify the COM port setting on the docking station, refer to “Verifying Devices are Installed”. To verify the COM port setting on your PDA, refer to the documentation that came with it.

Connecting to a Local Area Network

To connect an Ethernet cable with an RJ-45 connector, attach the cable connector to the Ethernet/network port on the docking station. Additional procedures to connect to an actual network depend on the type of network you are using. Contact your network administrator for detailed instructions.

NOTE: THE DOCKING STATION SUPPORTS HOT SWAPPING OF THE NETWORK CABLE.

Connecting a USB Device

To connect a USB device, plug it into a USB port on the docking station and follow the additional instructions provided with the device. All four USB ports meet USB High-speed requirements of a 480Mbps transfer rate and a minimum of 500mA of power. Note that 2 out of the 4 USB ports are designed to provide 1000mA, twice as much as standard USB specifications. See “Targus Always On” and “Using USB Devices That Require More Power” for more details.

12