Haier 0010518181, HSU-09HG13-B, HSU-12HG13-B Selection of Installation Place Outdoor Unit

Page 2

140

415

280

140

Floor fixing dimensions of the outdoor unit (Unit:mm)

HSU-09HG13-B

HSU-12HG13-B

Fixing of outdoor unit

Fix the unit to concrete or block with bolts( 10mm) and nuts firmly and horizontally.

When fitting the unit to wall surface, roof or rooftop, fix a supporter surely with nails or wires in consideration of earthquake and strong wind.

If vibration may affect the house, fix the unit by attaching a vibration-proof mat.

Indoor Unit

Selection of Installation Place Outdoor Unit

Place, robust not causing vibration, where the body can be supported sufficiently.

Place, not affected by heat or steam generated in the vicinity, where inlet and outlet of the unit are not disturbed.

Place, possible to drain easily, where piping can be connected with the outdoor unit.

Place, where cold air can be spread in a room entirely.

Place, nearby a power receptacle, with enough space around. (Refer to drawings).

Place where the distance of more than lm from televisions, radios, wireless apparatuses and fluorescent lamps can be left.

In the case of fixing the remote controller on a wall, place where the indoor unit can receive signals when the fluorescent lamps in the room are lightened.

Place, which is less affected by rain or direct sunlight and is sufficiently ventilated.

Place, possible to bear the unit, where vibration and noise are not increased.

Place, where discharged wind and noise do not cause a nuisance to the neighbors.

Place, where a distance marked is available as illustrated in the above figure.

Power Source

Before inserting power plug into receptacle, check the voltage without fail. The power source is the same as the corresponding name plate.

Install an exclusive branch circuit of the power.

A receptacle shall be set up in a distance where the power cable can be reached. Do not extend the cable by cutting it.

Selection of pipe

To this unit, both liquid and gas pipes shall be insulated as they become Iow temperature in operation.

Use optional parts for piping set or pipes covered with equivalent insulation material.

 

 

 

For 09

For 12

 

 

 

 

 

Liquid pipe

(

)

6.35mm(1/4")

6.35mm(1/4")

 

 

 

 

 

Gas pipe

(

)

9.52mm(3/8")

12.7mm(1/2")

2

Image 2
Contents Installation Manual of Room Air Conditioner No.0010518181Selection of Installation Place Outdoor Unit Indoor unit When the mounting plate is fixed side bar and lintelInstallation of the Indoor Unit Drawing of pipe Making a Hole on the Wall and Fitting the Piping Hole CoverUnloading of indoor unit body Indoor unitFixing the indoor unit body Other direction pipingWhen connecting the cable before installing the indoor unit Removing the wiring coverWhen connecting the cable after installing the indoor unit Outdoor unit Outdoor unitPurging Method For 9k 12kCutting and Flaring Work of Piping Power Source InstallationCheck for Installation and Test Run On Drainage

0010518181, HSU-12HG13-B, HSU-09HG13-B specifications

The Haier HSU-12HG13-B and HSU-09HG13-B are two advanced split air conditioning units designed to provide optimal cooling and heating solutions for residential and commercial spaces. Featuring cutting-edge technologies, these models ensure comfort and efficiency in various environments.

The HSU-12HG13-B offers a cooling capacity of 12,000 BTU and is suitable for medium-sized rooms, while the HSU-09HG13-B, with a cooling capacity of 9,000 BTU, is perfect for smaller spaces. Both models boast energy efficiency through their EER (Energy Efficiency Ratio) ratings, assisting users in reducing energy consumption and lowering electricity bills without compromising on performance.

One of the standout features of both air conditioners is their inverter technology. This technology allows the units to adjust the compressor speed automatically, optimizing energy use and providing consistent temperature control. Inverter air conditioners are known for their quiet operation, making them suitable for bedrooms, study rooms, and other noise-sensitive areas.

Additionally, these models are equipped with a multi-functional remote control, allowing users to easily adjust settings from a distance. Features such as programmable timers, sleep mode, and temperature display enhance user convenience and comfort. The units also include a turbo mode for rapid cooling or heating, which is particularly beneficial during extreme weather conditions.

Both the HSU-12HG13-B and HSU-09HG13-B incorporate advanced air purification features. The integrated filters capture dust, allergens, and other airborne particles, ensuring cleaner and healthier air for occupants. The 0010518181 filter model is designed for easy maintenance, with accessible filters that can be cleaned or replaced without hassle.

In terms of installation, these units come with a compact indoor unit design that fits seamlessly into modern interiors, and the outdoor unit is engineered for durability and quiet operation. They also adhere to international standards for performance and safety, giving users peace of mind in their purchase.

Overall, the Haier HSU-12HG13-B and HSU-09HG13-B air conditioning systems stand out for their efficiency, innovative technologies, and user-friendly features, making them excellent choices for anyone looking to enhance their indoor climate. With reliable performance and effective air purification, these models promise not only comfort but also healthier living spaces.