Haier 0010518181, HSU-09HG13-B, HSU-12HG13-B installation manual Removing the wiring cover

Page 5

Indoor unit

Connecting the indoor/outdoor Electric Cable

Removing the wiring cover

Remove terminal cover at right bottom corner of indoor unit, then take off wiring cover by removing its screws.

When connecting the cable after installing the indoor unit

1. Insert from outside the room cable into left side of the wall hole, in which the pipe has already existed.

2. Pull out the cable on the front side, and connect the cable making a loop.

When connecting the cable before installing the indoor unit

Insert the cable from the back side of the unit, then pull it out on the front side.

Loosen the screws and insert the cable ends fully into terminal block, then tighten the screws.

Pull the cable slightly to make sure the cables have been properly inserted and tightened.

After the cable connection, never fail to fasten the connected cable with the wiring cover.

Note: When connecting the cable, confirm the terminal number of indoor and outdoor units carefully. If wiring is not correct, proper operation can not be carried out and will cause defect.

1.If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. The type of connecting wire is H05/07RN-F or 245IEC57(YZW).

2.If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.

3.The wiring method should be in line with the local wiring standard.

4.After installation, the power plug should be easily reached.

5.A breaker should be incorporated into fixed wiring. The breaker should be all-pole switch and the distance between its two contacts should be not less than 3mm.

Indoor unit

3 4

3 4

Indoor unit

Outdoor unit

Outdoor unit

HSU-12HG13-B

HSU-09HG13-B

connecting wiring:

 

Power cable:

-mod 09-12: LN

 

:

3G1.0mm

-mod 09-12: 3G1.0mm

 

34:

2X0.75mm

 

5

Image 5
Contents No.0010518181 Installation Manual of Room Air ConditionerSelection of Installation Place Outdoor Unit Installation of the Indoor Unit Drawing of pipe When the mounting plate is fixed side bar and lintelIndoor unit Making a Hole on the Wall and Fitting the Piping Hole CoverFixing the indoor unit body Indoor unitUnloading of indoor unit body Other direction pipingWhen connecting the cable before installing the indoor unit Removing the wiring coverWhen connecting the cable after installing the indoor unit Outdoor unit Outdoor unitFor 9k 12k Purging MethodCheck for Installation and Test Run Power Source InstallationCutting and Flaring Work of Piping On Drainage

0010518181, HSU-12HG13-B, HSU-09HG13-B specifications

The Haier HSU-12HG13-B and HSU-09HG13-B are two advanced split air conditioning units designed to provide optimal cooling and heating solutions for residential and commercial spaces. Featuring cutting-edge technologies, these models ensure comfort and efficiency in various environments.

The HSU-12HG13-B offers a cooling capacity of 12,000 BTU and is suitable for medium-sized rooms, while the HSU-09HG13-B, with a cooling capacity of 9,000 BTU, is perfect for smaller spaces. Both models boast energy efficiency through their EER (Energy Efficiency Ratio) ratings, assisting users in reducing energy consumption and lowering electricity bills without compromising on performance.

One of the standout features of both air conditioners is their inverter technology. This technology allows the units to adjust the compressor speed automatically, optimizing energy use and providing consistent temperature control. Inverter air conditioners are known for their quiet operation, making them suitable for bedrooms, study rooms, and other noise-sensitive areas.

Additionally, these models are equipped with a multi-functional remote control, allowing users to easily adjust settings from a distance. Features such as programmable timers, sleep mode, and temperature display enhance user convenience and comfort. The units also include a turbo mode for rapid cooling or heating, which is particularly beneficial during extreme weather conditions.

Both the HSU-12HG13-B and HSU-09HG13-B incorporate advanced air purification features. The integrated filters capture dust, allergens, and other airborne particles, ensuring cleaner and healthier air for occupants. The 0010518181 filter model is designed for easy maintenance, with accessible filters that can be cleaned or replaced without hassle.

In terms of installation, these units come with a compact indoor unit design that fits seamlessly into modern interiors, and the outdoor unit is engineered for durability and quiet operation. They also adhere to international standards for performance and safety, giving users peace of mind in their purchase.

Overall, the Haier HSU-12HG13-B and HSU-09HG13-B air conditioning systems stand out for their efficiency, innovative technologies, and user-friendly features, making them excellent choices for anyone looking to enhance their indoor climate. With reliable performance and effective air purification, these models promise not only comfort but also healthier living spaces.