Samsung DVD-V9650 instruction manual Rear Panel, DVD/VCR Output Chart, ENG-11

Page 11

S E T U P

Rear Panel

Œ ´ ˇ

¨ ˆ Ø ∏ ” ’

1AUDIO OUT

Connect to the Audio input jacks of your television.

2COMPONENT VIDEO OUT

-Use these jacks if you have a TV with Component Video in jacks.

These jacks provide PR, PB and Y video.

-If Component (Progressive Scan) Video Output is selected in the Alt Video Out menu or by using the P.SCAN button on the front panel, progressive scan mode will be enabled.

-If Component (Interlace Scan) Video Output is selected in the Alt Video Out menu or by using the P.SCAN button on the front panel, interlaced scan mode will be enabled.

3.HDMI OUT JACK

-Use the HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture.

-If an HDMI cable is connected to an HDMI- compatible TV, HDMI will be output automatically within 10 seconds.

-If you want to use a Video, S-Video or Component Output, unplug HDMI cable.

4RF IN (FROM ANT.)

Connect the RF Antenna cable to your DVD- VCR.

5RF OUT (TO TV)

Connect your DVD-VCR to a TV

6LINE OUT (VIDEO/AUDIO)

Use a Video/Audio cables to connect to the Video/Audio input jacks on your television.

7LINE IN 1 (VIDEO/AUDIO)

Connect to the Video/Audio output jack of your external device.

8DIGITAL AUDIO OUT (OPTICAL/COAXIAL)

-Use either an optical or coaxial digital audio cable to connect to a compatible Dolby Digital receiver.

-Use either an optical or coaxial digital audio cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

9S-VIDEO OUT

Use the S-Video cable to connect this jack to the S-Video input jack on your television for higher picture quality.

DVD/VCR Output Chart

Type of Connection

DVD Output Jacks

VCR Output Jacks

 

 

 

S-VIDEO OUT

O

X

 

 

 

COMPONENT VIDEO OUT

O

X

AUDIO OUT (L,R)

O

X

 

 

 

DIGITAL AUDIO OUT (COAXIAL)

O

X

 

 

 

LINE OUT (A/V)

O

O

 

 

 

RF OUT

O

O

 

 

 

HDMI OUT

O

X

 

 

 

O: Active. X : Inactive.

Notes

Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

If Component (Progressive Scan) Output is selected in Alt Video Out menu, Video and S-Video will not work.

See pages 63 ~ 64 to get more information on how to use the Alt Video Out menu.

ENG-11

Image 11
Contents DVD-V9650 Important Safety Instructions FCC Note for U.S.A PrecautionsHandling Cautions Before you start AccessoriesInstall Batteries in the Remote Control If the remote control doesn’t operate properlyTable of Contents Reference DVD OperationsVCR Operations VCR Features General FeaturesDVD-VCR Features DVD FeaturesRegion Number Disc Type and CharacteristicsCharacteristics Disc MarkingsENG-10 DescriptionFront Panel Controls Front Panel DisplayENG-11 DVD/VCR Output ChartRear Panel ENG-12 Tour of the Remote ControlENG-13 Connecting the Antenna CableMethod1 Antenna + DVD-VCR + TV No Cable box ENG-14 ENG-15 Before Connecting the DVD-VCRConnection to a TV Connection to a TV VideoENG-16 Connection to a TV S-VideoENG-17 Connection to a TV InterlaceENG-18 Connection to a TV ProgressiveENG-19 Hdmi Video SpecificationsConnection to a TV with Hdmi Jack Hdmi connection description Why does Samsung use HDMI?ENG-20 Hdmi High Definition Multimedia InterfaceENG-21 Connection to an Audio SystemConnection to an Audio System 2 Channel Amplifier ENG-22 ENG-23 Connecting a Power Cord & Auto SetupENG-24 Selecting a Menu LanguageAuto, 1, 2 Setting the ClockSetting the Clock Automatically ENG-25Select the time zone of your area Setting the Clock ManuallyENG-26 ENG-27 Antenna Selecting the Video Signal-sourceMemorizing the Channels ENG-28Repeat steps 7 to add or To delete additional channels Storing Channels in Memory Automatic MethodAdding and Erasing Channels Manual Method ENG-29ENG-30 Selecting the RF Output ChannelENG-31 Selecting the Front Panel DisplayENG-32 Setting the Power Off AutomaticallyENG-33 Playing a DiscBefore Play PlaybackSlow Motion Play Except CD Pausing PlayENG-34 Step Motion Play Except CDSkipping Tracks Using the Search and Skip FunctionsContinuous Search Mode Searching through a Chapter or TrackENG-36 Using the Display FunctionWhen Playing a DVD/CD/MPEG4 To exit the menu, press Info button again ENG-37ENG-38 Using the Disc and Title Menu DVDENG-39 Using the Function Menu DVDENG-40 When playing a DVD/CDRepeat Play Segment will begin repeating in a continuous loop Using the A-B Repeat functionENG-41 Press the #$ buttons to select aENG-42 When playing a DVDContinuous Slow Mode Slow Repeat PlayENG-43 Adjusting the Aspect Ratio EZ ViewTo Playback using Aspect Ratio DVD If you are using a 169 TVFor 169 aspect ratio discs Letter Box If you are using a 43 TVDisplays the content of the DVD title in 43 aspect ratio ENG-44During play, press the Audio button Using the Audio button DVD/CD/MPEG4Selecting the Audio Language ENG-45ENG-46 Using the Subtitle button DVD/MPEG4Subtitle changes when the #$ button is pressed repeatedly Selecting the Subtitle LanguageChanging the Camera Angle Using the Bookmark FunctionUsing the Angle button DVD Using the Mark button DVDENG-48 Recalling a Marked SceneClearing a Bookmark Press the $ or Enter button Using the Zoom Function DVDENG-49 ENG-50 Clips Menu for MP3/WMA/JPEG/MPEG4Folder Selection Off, Track, Folder Random MP3/WMA PlaybackRepeat/Random playback ENG-51Do not try recording copyright protected MP3 files CD-R MP3/WMA fileENG-52 ENG-53 MPEG4 PlaybackMPEG4 Play Function Repeat PlaybackDivX5 MPEG4 Function DescriptionThese functions may not work depending on MPEG4 file CD-R AVI fileENG-55 Play mode menu will appearProgram Play & Random Play Program PlayENG-56 Picture CD PlaybackENG-57 CD-R Jpeg Discs$ or Enter button Using the Setup MenuENG-58 Menu Setting Up the Language FeaturesTo make the DVD Setup menu ENG-59Audio Language FunctionENG-60 Disc MenuENG-61 Setting Up the Audio OptionsDynamic Compression Audio OptionsENG-62 Dolby/DTS Digital OutENG-63 Setting Up the Display OptionsAlt Video Out Display OptionsENG-64 TV Aspect720p 1280 x 1080i 1920 x HdmiPlayer is locked Setting Up the Parental ControlENG-66 ENG-67 Setting Up the Rating LevelSetting up in Level ENG-68 Changing the PasswordENG-69 DivXR RegistrationENG-70 Inserting and Ejecting a Video Cassette TapeTo Insert a Video Cassette Tape To Eject a Video Cassette TapeENG-71 Playing a Pre-Recorded Video Cassette TapePlaying the Tape Fps/Rps Review Special VCR Playback FeaturesENG-72 Frame AdvanceInsert and play a video cassette tape Using Automatic TrackingENG-73 ENG-74 Selecting the Cassette TypeENG-75 Setting the Auto PlayENG-76 Setting the Auto RepeatENG-77 Using the Tape CounterWhen you are ready ENG-78 Using the Assemble Edit FunctionCH or button for television channel Input SEL. button for Selecting the Audio Output ModeAudio output Mode ENG-79Next Etc Seq Searching for a Specific SequenceENG-80 PrevENG-81 Variable Search SystemENG-82 Basic RecordingProtecting a Recorded Cassette RecordingPause/Resume Recording Press the Play/Pause button Special Recording FeaturesTo Watch a different Channel while Recording ENG-83ENG-84 Using One-Touch RecordingTo Watch a DVD while Recording To Add Recording TimeMaximum Recording Time SP vs. SLP Selecting the Recording SpeedENG-85 Add Recording TimeENG-86 Making a Timer RecordingTo Begin Setting the Timer Recording Press the % button to move to the next settingDaily/Weekly Date Programming ENG-87Selecting Auto Speed Button Function Using the TV Buttons on the Remote ControlENG-88 ENG-89 TroubleshootingIdentifying DVD Problems Identifying VCR Problems Inputs Technical SpecificationsENG-91 ENG-92 ENG-93 Contact Samsung World Wide Warranty AK68-00956F.02 Contact Samsung World Wide