Samsung DVD-V9650 instruction manual Storing Channels in Memory Automatic Method, ENG-29

I N I T I A L S E T U P

Storing Channels in Memory (Automatic Method)

Auto Channel Memory will automatically seek and store all active channels in your area.

5

Press the "&# buttons to select Auto Channel Memory, then press the % or ENTER

button.

The DVD-VCR will automatically search for all available channels in the selected tuner band.

This procedure may take a few minutes to complete.

When finished, the lowest channel found will be displayed.

Note

Do not turn the power off when Auto Channel Memory function is proceeding.

If the power is off, Auto Channel Memory should be reset.

Adding and Erasing Channels (Manual Method)

Use this feature if Auto Channel Search missed a channel that you would like to add, or to delete a channel you wish to remove.

6

Press the "&# buttons to select Channel Add/Delete, then press the % or ENTER button.

7

Press the CH "&#!buttons to tune in the channel number you wish to add or delete. Use the number button to select the channel directly.

CHANNEL ADD/DELETE

Select channel :	[07]
and press [%] to ADD
press [$] to DELETE
RETURN	CH "#

8 CHANNEL ADD/DELETE

Press the $ or % button to delete the channel from your channel list or to add.

Repeat steps 7 to add or

to delete additional channels.

Press the MENU button to exit.

Select channel :	[07]
(in memory)
and press [%] to ADD
press [$] to DELETE
RETURN	CH "#

Note

Use the number button to access the channel directly.

ENG-29