Samsung DVD-V1000 Changing the Rating Control Password Receiver Connections, Before You Begin

01547A DVD-V1000/XAA-Eng2 5/16/02 3:38 PM Page 34

Changing the Rating Control Password

A/V Receiver Connections

GB

RATING CONTROL

Enter New Password

----

Use 0-9 Keys

RETURN To Go Back

CHANGE PASSWORD

Enter New Password

----

Use 0-9 Keys

RETURN To Go Back

CHANGE PASSWORD

Re-Enter Password

----

Use 0-9 Keys

RETURN To Go Back

CHANGE PASSWORD

PASSWORD NOT CHANGED

RETURN To Continue

CHANGE PASSWORD

PASSWORD HAS

BEEN CHANGED

Follow these instructions to change the Rating Control password.

1Select “Changing Password”

Use the up/down to select “Changing Password” from the “Rating Control” menu.

2Enter New Password

Enter a new 4-digit password using the 0–9 buttons on the remote control.

3Re-enter Password

Enter the same 4-digit password using the 0–9 buttons on the remote control to confirm your password.

4Confirm New Password

After you re-enter the password, a menu will appear to indicate whether or not the password has been successfully changed. Press the RETURN button to continue.

• Press the RETURN button repeatedly to exit the menu system.

To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD-VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers.

Before You Begin...

•If your A/V receiver IS equipped with a Dolby Digital Decoder, you have the option to bypass the DVD-VCR’s built-in Dolby Digital Decoder. Use the Digital Audio Out connection below.

1Digital Audio Out

Connect EITHER an optical cable OR a digital coaxial cable from the Digital Audio Out jacks on the back panel of the DVD-VCR to their corresponding Digital Audio Input jacks on your A/V Receiver:

•	Optical	Use whichever connection is available
•	Coaxial	on your A/V Receiver.

GB

OR

To Digital Audio Input of an A/V

Receiver with a Dolby Digital

Decoder

RETURN To Continue

34 35