Samsung DVD-V1000 Dolby Digital Decoder Setting, DTS Decoder Setting, Set Dolby D Decoder

01547A DVD-V1000/XAA-Eng3 5/16/02 3:40 PM Page 36

Dolby Digital Decoder Setting

GB

If your A/V receiver is equipped with a Dolby Digital decoder, your DVD-VCR can output Dolby Digital 5.1 sound, but you MUST enable this feature in the menu system to prevent damage to your speakers.

NOTE: Select “Yes” ONLY if you have connected a Dolby Digital- equipped A/V receiver to the Digital Output (optical or coaxial) on the DVD-VCR back panel.

1Open “SETUP MENU”

Press the SETUP button.

2 Select “DVD Setup”

Using the up/down, move the selection arrow to “DVD Setup,” then push right to select.

3 Select “Language/Audio Setup”

Move the selection arrow to “Language/Audio Setup,” then push right to select.

4 Set “Dolby D Decoder”

Move the selection arrow to “Dolby D Decoder,” then push right to select from the following options:

• Yes – Indicates that your A/V receiver is equipped with a Dolby Digital decoder.

• No - Indicates that your A/V receiver is NOT equipped with a Dolby Digital decoder.

DTS Decoder Setting

GB

If your A/V receiver is equipped with a DTS decoder, your DVD- VCR can output DTS digital sound, but you MUST enable this feature in the menu system.

NOTE: Select “Yes” ONLY if you have connected a DTS-equipped

A/V receiver to the Digital Output (optical or coaxial) on the

DVD-VCR back panel.

1 Open “SETUP MENU”

Press the SETUP button.

2 Select “DVD Setup”

Using the up/down, move the selection arrow to “DVD Setup,” then push right to select.

3 Select “Language/Audio Setup”

Move the selection arrow to “Language/Audio Setup,” then push right to select.

4 Set “DTS Decoder”

Move the selection arrow to “DTS Decoder,” then push right to select from the following options:

• No - Indicates that your A/V receiver is NOT equipped with a DTS decoder.

• Yes – Indicates that your A/V receiver is equipped with a DTS decoder.

36 37