Samsung DVD-V1000 instruction manual Can also clear the event in the Event Summary screen

01547A DVD-V1000/XAA-Eng4 5/16/02 3:41 PM Page 60

How to Set a Timer Recording

Timer Recording Errors/Solutions

GB

Time Record icon

Complete Program Record, or CPR, helps to ensure you won’t run out of tape before your Timer Recording is complete. When Auto is selected, the Timer event begins to record in SP; the DVD-VCR then calculates how much time is remaining on the tape and adjusts the record speed to SLP if necessary to fit the entire event. If there is not enough tape to record the entire event, the DVD-VCR will record in SLP until the end of the tape is reached.

6Set Event Type

Use the number buttons (1–4) to set the type of event, i.e. how often the event will be recorded. The default setting is “1–Time”.

11–Time – The event will be recorded only once.

2Monday-Friday – The event will be recorded every weekday.

3Weekly – The event will be recorded once a week.

4Always – The event will be recorded every single day.

7Set Recording Source

Use the number buttons (1–3) to set the Record Source. The default setting is the current tuner (television) channel.

1CH # – Records from the Tuner. Use the number buttons (0–9) to set the channel number.

2Line 1 – Records from the front line inputs

3Line 2 – Records from the rear line inputs.

8Set Recording Speed

Use the number buttons (1–3) to set the Recording Speed. The default setting is Auto.

1Auto – Complete Program Record (see sidebar).

2SP – Standard Play. Delivers best quality. A T-120 tape will record 2 hours.

3SLP – Super Long Play. Delivers maximum recording time.

A T-120 tape will record 6 hours.

9Confirm Settings

When all setting are complete, press RETURN to confirm the Timer event and view a summary of all programmed events.

•To program another event, select another available event number.

•To edit an event, select an event number that has already been programmed.

•To delete an event, use the up/down to select it and then press

CLEAR.

•To exit the Event Summary screen, press RETURN.

10Programming is Complete!

The event is stored in memory and will record at the scheduled time. A Timer icon will appear on the front panel display to indicate that an event is programmed.

•If there is a problem with your Timer Recording, the Timer icon will flash and a Timer Error appears on the TV screen; see page 61.

•The VCR will automatically turn on when the Timer Recording begins.

						GB
If there is a problem with your Timer Recording, the Timer icon
will flash on the Front Panel Display and an error message will
appear on the On-Screen Display. Once you correct the error, the
event will begin if there is still time remaining for that event. You		1
can also clear the event in the Event Summary screen.
		N/CLOSE
1	Tape Missing				LINE
				CHANNELRECVIDEO
	There is no videotape in the VCR deck.
	• Insert a videotape in the VCR deck.
2	Tape Missing Tab
	The videocassette is missing the Record Safety Tab.
	• Insert a video cassette with the Record Safety Tab intact, or
	place a small piece of adhesive tape over the opening to permit
	recording
3	Not Ready
	The VCR deck is not in Stop mode (e.g., it is playing, rewinding,
	etc.).
	• Press Stop to stop the VCR deck
			TV VIEW +	ANGLE

4	Overlapping Events			VOL	CH
	Two or more events are programmed to occur at the same time:		INPUT	-	PREV.CH
			3
	•	When you program a new event, the DVD-VCR checks all timer
		events for conflicts. If two events overlap, you will be prompted to	REC		DISC MENU
		either delete one of the events, or allow them to overlap.
	•	If events overlap, the first event will be completely recorded, then
		the next event will start and the remainder of that event will be			SETUP
		recorded.			/ENTER

60 61