Searching for Music/Voice Files
To search for specific parts during play
Listening to FM Radio
First, press the 
key to display the menu screen and select FM Radio.
●Press and hold the joystick to the left or right during playback to search for the part you want to listen to.
●Release the joystick to resume play normally.
To change tracks during play
●Press the joystick to the 
position briefly during playback to play the next track.
●Press the joystick to the 
position briefly within 5 seconds after playback starts,
to move to and play the previous track. Press the joystick to the 
position briefly after five seconds to play the current track from the beginning.
To change tracks when stopped
●Press the joystick to the left or right in stop mode to move to the previous/next track.
Note
Manual Search for a Frequency
●Press the joystick to the left or right
briefly to search manually for the frequency you want.
Manual Storage of a Frequency
●After searching manually for the frequency you
want, press and hold the 
button in the centor to display the Save screen.
●Use 
,
to select the number you want to assign to save the frequency and then press
the 
button.
Automatic Search for a Frequency
●Press and hold the joystick to the left or right to search for and stop at frequencies with reception.
Automatic Storage of a Frequency
●Press and hold the A↔ B button while in FM Mode.
●Frequencies within the range of 88.0MHz to 108.0MHz are automatically selected and stored.
●Frequencies are automatically stored, starting from 1.
●VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file.
●In the case of a VBR file, you cannot move to and play the previous track even if you press the joystick
to the 
position within 5 seconds after playback starts.
●Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.
30
Note
● To exit from FM Mode press the | button in the center. | Number of channels saved. |
|
● Mono (MO) or Stereo (ST) is automatically selected. | 31 |
|
●Up to 20 frequencies can be stored.