Troubleshooting
Problem
Power will not turn on.
Buttons do not work.
The screen will not turn on.
Power is turning off.
Battery life differs from what is stated in the Manual.
Program Malfunction
Connection to your PC is disabled.
The file transfer rate is too low.
Check points & Troubleshooting
■Power will not turn on if the battery is fully discharged. Recharge the battery and turn the power on again.
■Press and hold the [MENU] and [A 
B/ 
] buttons at the same time to reset the system.
■Check if the [HOLD] switch is in the direction of the arrow position.
■Check if you pressed the right button, then press again.
■Press and hold the [MENU] and [A 
B/ 
] buttons at the same time to reset the system.
■The screen may not be visible under direct sunlight.
■When <LCD Off> is selected from <Settings> → <Display>, the LCD will be turned off. Press any button and see if it turns on.
The power is automatically turned off when the battery is fully discharged. Recharge the battery.
■The battery time may vary, depending on the sound mode and display setting.
■Product life may be shortened when left for extended periods in low or high temperatures.
Please check if your PC requirements are met.
Press <Start> on the toolbar of your PC to run Windows Update. Select Key Updates and Service Packs, then update all. Reboot your PC and reconnect.
If you are running multiple programs including Media Studio on your PC, the file transfer rate will be low. Make sure to exit unnecessary programs before proceeding.
|
| Chapter 5. |
|
| Troubleshooting |
|
|
|
Troubleshooting | Setting System/ | |
67