OPERATIONAL INSTRUCTIONS
AUX In Mode
MAINTENANCE AND TROUBLESHOOTING GUIDE
Maintenance
AUX in mode plays audio from an external source like an MP3 player.
To play audio with AUX In mode:
1.Turn the volume low on both the iNT170 and, if adjustable, the audio source device.
2.Connect the external audio source to the AUX In 3.5 mm stereo socket.
3.Either press the MODE button until the display shows AUX in or press the MENU button > Main menu > AUX in. Another option is to press the AUX button on remote control.
4.Adjust the volume of the iNT170 (and, if necessary, the audio source device) as required.
Auxiliary input | 13:54 |
Audio In
Today’s Date: 07/04/2009
·Place the unit on a level surface away from sources of direct sunlight or excessive heat.
·Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
·Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can damage the surface of the unit.
Troubleshooting
· The iNT170does not turn on | |
- | The AC plug may not be connected properly. Check the connection. |
- The wall outlet may not function. Try another outlet. | |
· FM Stations do not broadcast clearly | |
- | Check the Scan Settings and Audio Settings. |
System Resetting
If you make a mistake, (ie. setting the incorrect language), you can reset unit by pressing and holding the MODE button for approximately three (3) seconds with the power on.
- | Rotate the unit until reception is clearer; signal may be weak. Relocate the FM radio antenna to |
| an open space. |
· Cannot connect to Network | |
- | Follow instructions for connecting to a network. |
22 iLuv | iNT170 V10M10_IM_EN_10132008 | iLuv 23 |