OPERATIONAL INSTRUCTIONS
Setting the Time and Date - continued
Automatic Updating: Automatic update works with data sent over FM or by the network. The clock is only updated when in a corresponding mode, so it is best to select a mode you use regularly. FM uses time signals broadcast with radio transmissions. Network uses a time signal sent from the Internet radio portal when in Internet radio mode.
1.Press the MENU button > System Settings > Time/Date > Auto update > then select Update from, Update from FM or Update from Network.
2.To set the time zone press the MENU button > System Settings > Time/Date > Set timezone >.
3.If your country uses daylight savings, the automatically updated time may be wrong by one hour. When daylight savings is in effect (during the summer), turn on the Daylight savings option through Daylight savings > ON
* The iNT170 will
Alarm and Sleep Functions
OPERATIONAL INSTRUCTIONS
Alarm and Sleep Functions - continued
Once the alarm is set, select Save to activate. The screen shows active alarms with an icon at the bottom left.
·At the set time, the alarm will sound. To temporarily silence it, press the SNOOZE/DIMMER button. You can change the snooze period (5min, 10min, 15min and 30min) by pressing the SNOOZE/DIMMER button. The radio returns to standby for the set period, with the silenced alarm icon flashing.
Sleep Function: To set the sleep timer, press the MENU button > Main menu > Sleep then choose from Sleep OFF, 15 Min., 30 Min., 45 Min. or 60 Min. by pressing the SELECT UP and DOWN buttons. Once you select a sleep period, the system returns to the main menu. Press the MENU button to return to the “Now playing” screen. The other option is to press the SLEEP button to achieve sleep function and sleep time.
As well as a clock/calendar, there are two versatile
Setting the Alarm: To set or change an alarm, either press AL1 / AL2 buttons or press the MENU button > Main menu > Alarms. Select the alarm number (1 or 2) then set the following:
· Enable: on/off |
04:32PM
04/07/2009
07:00AM |
|
| 08:30AM |
Connecting to a Network
For Internet radio mode, you need a network connection. To connect the iNT170 to your network, you need either a wired router and an ethernet (RJ45 network) cable, or a
The only requirement for using this Internet radio is a basic broadband Internet connection. When you select Internet radio, the iNT170 attempts to connect to a network. If this is the first time it has tried to connect, or if the stored networks are not accessible, the Network wizard starts automatically.
· | Time |
· | Mode: Buzzer, Internet radio or FM |
· | Preset: Last listened, |
· Frequency: Daily, Once, Weekends or Weekdays | |
· | Volume: 0 – 20. |
Alarms
Enable: On
Time: 06:30 AM
Mode: FM
Preset: 2
Frequency: Daily
·To run the Network wizard manually, press the MENU button > System settings > Network > Internet wizard.
·Once the wizard starts, enter the following information:
-If not already established, set the WLAN region (select country/ region from list)
-Network name (select your network from the list)
-If connecting to an encrypted wireless network, the key (password)
·To enter your key, use the SELECT UP and DOWN buttons to move the cursor through the characters and select. As each character is selected, the key is built up near the top of
the display.
Key:
p@s5W 
0123456789., ab BKSP cdefghijklmnopq OK rstuvwxyzABCDEF 
GHIJKLMNOPQRSTU CANCEL
10 iLuv | iNT170 V10M10_IM_EN_10132008 | iLuv 11 |