GETTING STARTED
Screen Displays - continued
Dialogue screens: Dialogue screens are shown to allow the user to change settings. They vary in complexity from simple Yes/No options up to the scrollable network password input screen.
OPERATIONAL INSTRUCTIONS
General Setup
1. | Place iNT170 on a suitable shelf or table and plug it in to a power outlet. |
2. | Once plugged in, the unit will automatically turn on. You should see a welcome message ‘iLuv |
| Starting’ and a moving progress bar. |
·As with menus, the selected item is shown with a white background.
·Dialogue screens mark the current setting with an asterisk (*).
Daylight savings
Daylight savings
OK OFF*
3. | The first time the unit is switched on, it shows the main menu. Press theSELECT button until FM |
| is highlighted on the menu. |
4. | Press the SELECT button again to confirm. |
5. | The FM Now playing screen displays, showing the lowest frequency (87.5 MHz). Press the |
| SELECT button. The frequency display will increase incrementally as the radio scans up. Once a |
| station is found, it will play, with the station name shown in the Now playing display. |
· The Standby screen shows the time, date and any active | 04/07/2009 |
| |||||||||||||||||||||
alarm times. |
| 04:32PM | |||||||||||||||||||||
|
| ||||||||||||||||||||||
· As you cycle through the play modes using the MODE button, |
|
|
|
|
|
|
| 07:00AM |
|
|
|
|
| 08:30AM | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the LCD screen will show a splash screen for each mode. After |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Internet |
| |||||
one second, the unit enters the selected mode plays the last |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Radio |
| ||||
station that was playing in that mode. If this is not possible, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the iNT170 will attempt to connect to the selected source by |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
scanning for stations, networks, or prompting for user input |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
as appropriate. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Setting the Language
The default language is English. To change this, press the MENU button > System settings > Languages > then select your language.
·A list of supported languages will appear on the LCD screen. Scroll up or down to choose from the list.
Setting the Time and Date
The time and date can be updated manually or automatically. Setting manually is simpler, but the time and date will be lost when power is off. Setting automatically is a little more complicated at first, but the time and date will be automatically synchronized with external clocks, so it should only need to be done once. As a result, automatic update is generally more accurate.
To enter the Time settings menu, press the MENU button > System settings > Time/date >
Manual Updating: Select “Set Time/Date”, the date and time are displayed as
MMactive (flashing).
·Adjust each value (month, day, year, hour, minute) with the
,
and SELECT buttons. As each value is adjusted, the next value becomes active and flashes.
·When you select the final value (minutes or AM/PM, depending on whether the clock is set to 12 or 24 hour mode), the display reverts to the now playing screen and shows the newly updated time.
Set Time/Date
01
• 01 • 2009
00:00
8 iLuv | iNT170 V10M10_IM_EN_10132008 | iLuv 9 |