Beacon Computer Phoenix Black manual Charging and Power, Basic Operation, To Charge, Batieries

CHARGING AND POWER:
The Phoenix should take approximately 2-3 hours to charge and has a
battery life of 5-7 hours depending on volume playback levels
The Phoenix does operate and play while plugged in and charging.
TO CHARGE:
		'
1. The included USB cable has 2 sides - a large standard plug, and a
	mini USB plug.
2. Plug the Mini USB plug into the socket on the back of the Phoenix.
3.	Plug the other end of the cable into a computer or any power
	adapter with a USB port. (sold separately)
4.	During charging, the light status ring will glow red. When charging is
	complete the light will turn off.	"'
NOTE: The USB cable is used for ch_cfrging only- not for any data transfer
BATIERIES:
The Phoenix contains a built in, ultra-portable 850 mA Lithium battery.
Please use caution and consult local authorities before disposing of
this unit.

BASIC OPERATION:

Turn On: Press and hold the POWER button for about 5 seconds until the light status ring turns blue

Turn Off: Press and hold the POWER button for about 5 seconds until the light status ring turns red

Enter Pairing Mode: Press and hold the POWER button for about 10 seconds until the light status ring flashes quickly.

Volume Up I Down: Press and hold the volume buttons. lhe Phoenix will chirp once either the highest or lowest setting has been reached. (Volume can be affected by the volume output of your phone or music player)

Changing Track I Skipping Songs: Press the track buttons once. (Function only works when in ~luetooth connection mode)

~~ Pause I Play: Press the PLAY outton once

NOTE: There are only 3 buttons on the top button panel of the Phoenix. The Volume and Track buttons are the same, and the POWER and PLAY buttons are the same. When pressing the button once, you will get a different function that when you press and hold the button.