Use of Remote Controller, Special Reminding, Features

Use of Remote Controller

1. button: Power on / off the machine. In off status, clock time is displayed and can be

adjusted by pressing Set button, and or button.

2.Mode button: With machined powered on, you can lightly press Mode button to shift between Real-time Heat / Warm, Medium Warm, Night Power, Time 1,Time 2,Time 1+Time 2 and Intelligent operation modes. In Medium Warm mode, default highest temperature is 40 and can't be adjusted. In Time 1 and Time 2 modes, default heating power is 2150W and can't be adjusted.

3.Ppwer button: With machine powered on, press this button to shift heating power level between 850 W, 1300 W and 2150 W.

4. or button: Same as Adjust button on control panel. If not in clock or delay time

adjusting status, you can use or button to increase or decrease temperature setting value between 35 - 75 with an increment 1 . If in clock or delay time adjusting status, these buttons can be used to increase or decrease time.

5.Set button: Press it to set clock time, and press or button to adjust the value. Press Confirm button after adjusting. In Real-time Heat / Warm mode, press Set button to adjust clock hour and minute together with Confirm button. In Time 1 mode, press Set button to set Time 1 hour and minute. In Time 2 mode, press Set button to set Time 2 hour and minute. In Time 1 + Time 2 mode, press Set button to set Time 1 hour and minute, and Time 2 hour and minute. In addition, in Medium Warm mode and Intelligent mode, Set button is inactive.

Notes:

1.Remote controller buttons (except Set button) are used in the same way as buttons with same name on control panel. After adjustment is made with Set button, press Confirm button to confirm.

2.Remote controller has a memory function. Upon re-starting after powering off, original settings keep unchanged.

3.As an optimum, remote controller shall be used in short distance pointing to the machine vertically. Water immersion shall be avoided. If battery is used up, to prevent battery liquid pollution, please open battery cover in indicated direction, remove used batteries and replace with new batteries installed as original. To avoid explosion, used batteries shall not be kept in hot places or put in fire, but shall be treated in accordance with related local regulations.

Electric Circuit Diagram

Before Usage

Dear users,

Thanks for choosing HAIER-THERMOCOOLwater heater product.

HAIER-THERMOCOOLproducts have good quality and excellent performance. To facilitate you to use the product, please read the manual and operate accordingly. Please retain it for future reference.

No matter what kind of problems you meet in usage, please contact with the local after - sales service agent. We are at your service all the time. Thanks again for choosing HAIER- THERMOCOOL Product.

The water heater you purchased may not full comply with the manual due to the improvement of product. We apologize for the inconvenience occurred therefrom.

Special Reminding

To ensure proper and safe use of the water heater, we hereby sincerely declare that users shall contact our designated professional service providers for installation and service. For inappropriate installation, HAIER-THERMOCOOLwould not undertake any liability.

Do disconnect the power supply before any maintenance and repair on the water heater. Unprofessional persons shall not adjust or repair the water heater.

Make sure the machine is full of water before powering it on, otherwise heating element may be damaged. Do ensure power socket complies with local standard and is reliably grounded. Ungrounded use is forbidden.

This electric water heater is provided with a safety valve, which shall not be randomly relocated or blocked.

Hot water above 50 may burn your skin. Do mix hot water and cold water before showering or washing.

At an ambient temperature below 0 , possible ice formation within pipes may break the pipes and cause the machine inoperable. Protection shall be made by emptying water in the tank. In case the water heater will not be used for more than 1 month, please empty the water and unplug the power plug.

If the electric water heater is heavily wetted by water, it should be checked by our authorized technicians before next use.

Hot water inside the water heater is not drinkable. Due to long time use, sediments will form inside the tank, and water quality may also deteriorate due to pipe aging. After washing rice and vegetables with water from the tank, please flush again with clean

N E

L: Brown wire

N: Blue wire

MT: High temperature limiter

EH: Heating element

RT: Sensor E:Yellow/green wire

Leakage Coil

Relay Relay Relay

W W W

SET	HEATING
ACTUAL	KEEPING

water.

Please do not place flammable matters like gasoline nearby the water heater, otherwise accidents like fire may occur.

Features

1.High Technology:

Full PC controlled. Display indicates the actual water temperature, temperature setting, clock and working state. Upon faults, power supply is automatically cut off and the display indicates fault code.

The intelligent heating feature reflects a more humanized design.

FCD-JTHMG50-III, FCD-JTHMG60-III, FCD-JTHMG80-III, FCD-JTHMG100-III specifications

Haier has been a leading player in the home appliance market, consistently innovating and delivering high-quality products. Among its impressive lineup, the Haier FCD-JTHMG series stands out with models FCD-JTHMG50-III, FCD-JTHMG60-III, FCD-JTHMG80-III, and FCD-JTHMG100-III, which are designed to cater to diverse consumer needs in modern kitchens.

The FCD-JTHMG series features advanced cooking technologies, ensuring that meals are prepared efficiently and effectively. These models integrate precise temperature control, allowing users to achieve optimal cooking results every time. The use of Japanese-style advanced thermoregulation technology helps maintain consistent heat distribution, reducing cooking times and enhancing the flavor of dishes.

A standout feature of the Haier FCD-JTHMG series is its intelligent cooking functions. Each model includes pre-set cooking modes designed for a variety of cuisines, facilitating easy meal preparation. Users can choose from options like stewing, steaming, frying, and more, enabling them to experiment with different cooking styles without requiring in-depth culinary expertise.

The FCD-JTHMG series also emphasizes user convenience with its touch control panel. The intuitive interface allows for straightforward selection of cooking modes and temperature adjustments. Moreover, the models are equipped with a digital display that provides real-time feedback, helping cooks monitor the progress of their meals.

In terms of design, these models exhibit a sleek and modern aesthetic, making them a stylish addition to any kitchen. The premium stainless steel exterior not only enhances durability but is also easy to maintain, ensuring that the appliances continue to look good over time.

Safety is another critical aspect of the FCD-JTHMG series. The models come with an automatic shut-off feature and overheat protection, providing peace of mind to users during operation. This focus on safety ensures that both novice and experienced cooks can use these appliances confidently.

Overall, the Haier FCD-JTHMG series, including the FCD-JTHMG50-III, FCD-JTHMG60-III, FCD-JTHMG80-III, and FCD-JTHMG100-III, is a testament to the brand's commitment to combining innovation, style, and functionality. With their advanced cooking technologies, intelligent user interfaces, and safety features, these models offer a reliable solution for today’s busy lifestyles. Whether preparing a quick meal or experimenting with new recipes, users can expect consistent, high-quality performance from the Haier FCD-JTHMG series.