Setting Environment, Parameters

Setting Environment

Do not locate in freezing places. If ice	Do not install it outdoors.
forms, tank and pipes will break, causing	Do not install it outdoors.
scalding and leakage.

Do not install it as stand-alone.

It shall be hung on firm and solid wall.

² »Ò °ª ²× °Ó ÎÚ Þ· Å¨ ÅË ®µ µÄ Ø· ½

Do not install it in places unable to drain	If a drain hose is connected, it shall be
Do not install it in places unable to drain	connected to sewage drain, avoiding
water.	spilling the room.

The tubes and pipes fitted on the product	are inseparable parts of the Safe Care

technology, and shall not be removed by yourself. Otherwise, HAIER-THERMOCOOLshall not be liable for any damages or injuries caused due to resulted potential risks.

Description of the Symbols

Never do that

Be sure to act as per instructions

Parameters

Rated voltage: 230V~ , 50Hz	Dimensions: (see to Fig. 1)
Power: 850 W /1300 W /2150 W	Weight: (see to Fig. 1)
Rated pressure: 0.75 Mpa	Volume :(see to Fig. 1)
Waterproof grade: IPX 4 ( )	Tap water pressure: not less than 0.05 MPa

Operation Instructions

Water heater automatically sets an energy saving temperature between 35 - 40 according to the difference between water temperature and ambient temperature (normally this medium temperature can ensure small demand but not shower. For shower, you need to quit Medium Warm mode, and press Mode button to enter Real-time Heating / Keeping mode.Then the water can be heated to the setting temperature in a short time.). When water temperature decreases to 34 , machine automatically restarts heating. Heating power level can be manually set with Power button.

Example: Fig. 10 shows Medium Warm mode. Press Power button to set power level 2150 W with corresponding indication lighted. The actual temperature then is 52 . When it decreases to 34 , machine will automatically re-heats to 40 and keeps warm. It cycles in this way. In this mode, the machine defaulted highest heating temperature 40 can't be adjusted.

HEATING

ACTUAL	ACTUAL
	KEEPING

(Fig.10)

(Fig.11)

7.Night Power Setting

With machine powered on, as described in Item 10, consecutively press Mode button

until it enters Night Power operation mode (with Night Power indication on the display). If you would use hot water in early morning, you may adjust operation mode to Night Power mode. Machine will heat / warm in default period (0:00 on and 6:00 off). Heating power level and highest temperature can be manually set. In this mode, you can press Set button to calibrate clock time.

In addition, in regional power consumption regulations, night power price rate is lower than in day, so Night Power mode will be easier and more economic.

Note: In selecting Night Power function, water heater clock shall be adjusted to local time. Inaccurate clock will cause night period partly charged as day use. (Only for regions with Peak and Valley Electricity Rates)

Example: With machine powered on, press Mode button to select Night Power mode. When PC clock displays 00:00, machine automatically starts heating. It enters warm status after reaching setting value and has thermostat control during 0:00 6:00. (see Fig.11)

8.Intelligent Heating Function

Intelligent heating function means that the system can analyze, process and memorize user's water use habits in one week, and accordingly heat water in advance automatically. With machine powered on, consecutively press Mode button until it enters Intelligent operation mode with intelligent indication lighted on. System automatically starts heating in the first memorized heating time since then. Heating power and highest temperature can be manually set.

In non-heating period, system remains standby with clock and intelligent indications lighted on. After it reaches the heating temperature, the machine will start to heat aotomatically. If you'd like to quit Intelligent Heating mode and enter another mode, you can press any button on control panel to activate the interface (buttons on remote controller inactive), and then press Mode button to shift modes.

Notes: 1. In any mode after powering on, Intelligent Heating function can memorize your water use habits. If you bathe in a fixed period everyday several times a week (4 times or more than 4 times), system will analyze and memorize your this habit and automatically start heating in advance.

2. Only in Intelligent mode can Intelligent function be executed.

SET

HEATING

SET

KEEPING

(Fig.12)

(Fig.13)

FCD-JTHMG50-III, FCD-JTHMG60-III, FCD-JTHMG80-III, FCD-JTHMG100-III specifications

Haier has been a leading player in the home appliance market, consistently innovating and delivering high-quality products. Among its impressive lineup, the Haier FCD-JTHMG series stands out with models FCD-JTHMG50-III, FCD-JTHMG60-III, FCD-JTHMG80-III, and FCD-JTHMG100-III, which are designed to cater to diverse consumer needs in modern kitchens.

The FCD-JTHMG series features advanced cooking technologies, ensuring that meals are prepared efficiently and effectively. These models integrate precise temperature control, allowing users to achieve optimal cooking results every time. The use of Japanese-style advanced thermoregulation technology helps maintain consistent heat distribution, reducing cooking times and enhancing the flavor of dishes.

A standout feature of the Haier FCD-JTHMG series is its intelligent cooking functions. Each model includes pre-set cooking modes designed for a variety of cuisines, facilitating easy meal preparation. Users can choose from options like stewing, steaming, frying, and more, enabling them to experiment with different cooking styles without requiring in-depth culinary expertise.

The FCD-JTHMG series also emphasizes user convenience with its touch control panel. The intuitive interface allows for straightforward selection of cooking modes and temperature adjustments. Moreover, the models are equipped with a digital display that provides real-time feedback, helping cooks monitor the progress of their meals.

In terms of design, these models exhibit a sleek and modern aesthetic, making them a stylish addition to any kitchen. The premium stainless steel exterior not only enhances durability but is also easy to maintain, ensuring that the appliances continue to look good over time.

Safety is another critical aspect of the FCD-JTHMG series. The models come with an automatic shut-off feature and overheat protection, providing peace of mind to users during operation. This focus on safety ensures that both novice and experienced cooks can use these appliances confidently.

Overall, the Haier FCD-JTHMG series, including the FCD-JTHMG50-III, FCD-JTHMG60-III, FCD-JTHMG80-III, and FCD-JTHMG100-III, is a testament to the brand's commitment to combining innovation, style, and functionality. With their advanced cooking technologies, intelligent user interfaces, and safety features, these models offer a reliable solution for today’s busy lifestyles. Whether preparing a quick meal or experimenting with new recipes, users can expect consistent, high-quality performance from the Haier FCD-JTHMG series.