Haier AB124FAAHA Installation of Water Drainage Pipe, Pipe Tighten Amm Flare shape Size Torque

Page 22
Large size seal pad 10 (accessory)
4mm below below500
Table 1

Installation Procedure

5. REFRIGERANT PIPING (As for outdoor piping, please refer to installation Manual of outdoor unit.)

Outdoor is precharged with refrigerant.

Be sure to see the Fig.1, when connecting and removing piping from unit.

For the size of the flare nut, please refer to Table 1.

Apply refrigerant oil at both inside and outside of lflare nut. Tighten it band tight 3-4 turns then tighten it. Use torque specified in Table 1. (Too much force may damage flare nut, causing gas leakage).

Check piping joints for gas leakage. Insulate piping as shown in Fig. below.

Cover joint of gas piping and insulator 7 with seal.

Apply refrigerant oil

Medium size seal pad 11 (accessory)

 

(Cover the piping joint

 

with seal pad.)

Torque spanner

Clamp 3

 

spanner

Insulator (accessory) 8

(For liquid pipe)

 

Piping joing

Insulator (accessory) 7

Gas pipe (For gas pipe)

Flare nut

Liquid pipe

Pipe

Tighten

A(mm)

 

Flare shape

size

torque

 

 

 

 

 

6.35

1420~1720N.cm

8.3~8.7

 

 

 

 

(144~176kgf.cm)

 

 

 

9.52

3270~3990N.cm

12.0~12.4

 

2

R0.4 ~ 0.8

 

(333~407kgf.cm)

 

 

6180~7540N.cm

 

0.5

45

 

 

 

 

 

15.88

18.6~19.0

90

A

 

(630~770kgf.cm)

 

19.05

9720~11860N.cm

22.9~23.3

 

 

 

(990~1210kgf.cm)

 

 

 

6. INSTALLATION OF WATER DRAINAGE PIPE

(1) Install water drainage pipe

Pipe dia, shall be equal or larger than that of unit piping.(pipe of polyethene; size: 25mm; O.D:32mm)

Drain pipe should be short, with a downward slope at least 1/100 to prevent air bag from happening.

If downward slope can't be made, take other measures to lift it up.

Keep a distance of 1-1.5m between suspending brackets, to make water hose straight.

1-1.5m

Slope over 1/100

Use the self-provided stiff pipe and clamp 1 with unit. Insert water pipe into water plug until it reaches the white tape. Tighten the clip until head of the screw is less than 4mm from hose.

Wind the drain hose to the clip using seal pad 9 .

Insulate drain hose in the room.

Tape (White)

Clamp

Clamp (accessory)

Self-provided stiff pipe

<Cautions for the drain water lifting pipe>

Installation height shall be less than 280mm.

There should be a right angle with unit, 300mm from unit.

 

300mm below 1~1.5m

Suspending bracket

Drain hose

 

below280220

below500

(accessory)

drain water lifting pipe

 

Clamp

(Note) (accessory)

Self-provided stiff pipe

(accessory) below75

The slope of water drain hose (1) shall be within 75mm, don't apply too much force on it. If several water hoses join together, do as per following proceedures.

Over 100

Connect water hoses with a T joint.

Specifications of the water hoses shall meet the requirements for the unit running.

20

Image 22
Contents No.0010576722A Please keep this manual carefully and safelyContents Disposal of the old air conditioner Machine is adaptive in following situation Applicable ambient temperature rangeRefrigerating circuit is leak-proof H05RN-F 2¡`1.0~1.5mm2Safety cautions Otherwise will suffer damage Inefficient venti- lation may cause suffocationFalling of goods and people may cause acci- dents Otherwise will be shockedLocation WiringOperating noise Introduction to Spare Parts Maintenance Install swing plate Take off airfilter Take of inlet grill CleanInstall inlet grill Close inlet grillSeasonal Reserve Post-season Care Pre-season CareTrouble Shooting Followings are not malfuncitionUnit is stopped Atically stopsInsufficient cooling or heating When Trouble HappensCooled air blown out when heating Insufficient coolingError display Indoor unit malfunction display code Outdoor unit malfunction display codeCustomer Need-to-know Using DirectionsEffectively use timer Customer Need-to-knowInstallation Procedure SymbolRefer to paper pattern when installing unit Meanings of Warning and CautionsSelection of Installation Place Before InstallationInstallation space Preparation for the Installation 620Insert Installation of Indoor UnitPolythene pipe Secure the washer firmlyInstallation of Water Drainage Pipe Pipe Tighten Amm Flare shape Size TorqueIndoor unit Sealing Ceiling material Installing the Decorated Board on the Body of Indoor UnitDecorated board AB184~484FCAHA Side of decorated boardDifferent from the actual condition Heat down gradient Shape elbow Cleat5m~2m support bracket Insulating over 1/100 Over 1/100 MaterialPiping Heat InsulatingConnecting method of circular terminal is ConnectingBy installation personnel according to After connecting line is completed, pressElectrical Wiring Field setting OFFUnit has temperature compensation function Technical Specifications

AB124FAAHA, AB484FCAHA, AB244FCAHA, AB184FCAHA, AB094FAAHA specifications

Haier has emerged as a leading manufacturer of high-performance refrigeration units, and its models AB424FCAHA, AB094FAAHA, AB184FCAHA, AB244FCAHA, and AB484FCAHA are standout examples. Each model boasts unique features tailored to meet the diverse needs of consumers, while simultaneously utilizing innovative technology to ensure energy efficiency and reliable performance.

The AB424FCAHA is designed with optimal storage capacity in mind. It offers adjustable shelving and a spacious interior that accommodates larger items easily. With a robust cooling system, it ensures that items are preserved at the ideal temperature. This model incorporates a frost-free operation, eliminating the need for manual defrosting, which saves time and energy.

In contrast, the AB094FAAHA is an excellent choice for smaller living spaces. Despite its compact size, it doesn’t compromise on performance. It includes energy-efficient features that help reduce electricity bills while maintaining freshness and quality of stored items. Its sleek design allows it to blend seamlessly into modern kitchens or dorm rooms.

The AB184FCAHA stands out with its advanced cooling technology, providing precise temperature control. This ensures that food items are kept at their ideal temperatures, extending their shelf life. Additionally, the model includes smart functionalities like temperature alarms that alert users in case of any fluctuations, thereby ensuring food safety.

The AB244FCAHA offers a perfect balance between capacity and energy efficiency. This model is equipped with an inverter compressor, which adjusts the cooling power according to the load. This feature not only saves energy but also significantly reduces noise levels compared to traditional compressors. It’s an ideal option for those seeking a quiet appliance without compromising on performance.

Finally, the AB484FCAHA caters to larger households or those needing considerable storage capacity. This model integrates advanced technologies such as multi-air flow systems that evenly distribute cool air throughout the unit. It also features LED lighting for better visibility, making it easier to find items at any time. With its exceptional storage solutions and high-performance capabilities, it stands out as a top choice for large families or meal preppers.

In conclusion, the Haier AB series showcases a diverse range of features and innovative technologies, ensuring that there is an optimal refrigerator solution for every individual’s needs. Whether for small apartments or larger households, Haier continues to meet the demands of modern consumers with style and efficiency.