Bogen 700286206, 700286198 specifications Speaker Wiring, Daisy Chaining, Speaker Phasing

Page 5

Speaker Wiring

Wiring is terminated at a snap-lock input con- nector. There are two positive and two nega- tive terminals to accommodate daisy chaining of speakers in a system. All wiring should be done prior to installation and then plugged into the rear of the speaker.

Daisy Chaining

The speaker’s snap-lock input connector allows for easy daisy chaining of speakers by providing a second terminal of each polarity. Refer to the figures for proper wiring for daisy chaining of terminals.

Speaker Phasing

Keep the same polarity terminals wired together to ensure correct phasing. In order to provide the best possible sound, all of the speakers in a system need to be pushing out and pulling in at the same time.

If the connections to one speaker in a system are reversed from the others, that speaker’s movement will be out of sync with the other speakers.This will result in a loss of low frequency response and will effect the overall performance of the system.

3

Image 5
Contents Pendant Speaker Product Description Front Drawing Product DiagramsSpeaker Grille Installation Speaker InstallationSuspension Cable Assembly Safety CableSpeaker Phasing Speaker WiringDaisy Chaining 16Ω Systems Selecting Power Levels70V/100V Systems Specifications Specifications