Bid Specs, Sld | Williams Sound PPA R1600 specification

FM Remote Speaker • Model PPA R1600

Bid Specs:

PPA R1600

The Williams Sound Corp. PPA R1600 shall be a powered speaker and have a sixteen channel wideband 72-76 MHz receiver that can be accessed on the back of the unit. It shall be housed in a black heavy duty plastic enclosure 12.4” x 7.09” x 5.6” and weigh approximately 9 lbs.

The R1600 shall have a 20 watt amplifier and two way speaker system with a 5.25” magnetically shield- ed woofer and a 1” dome tweeter.

The R1600 shall have an RCA line input, RCA line output and 1/4” low impedance microphone input. It shall have separate microphone and line in level adjust and have a master tone and volume rotary adjust.

The receiver sled shall have a 75 Ohm antenna output, on/off audio level rotary adjust, RF rotary squelch adjust and sixteen position rotary channel selector. The R1600 shall be supplied with a 39 inch telescopic antenna.

The R1600 shall be supplied with a wall mount bracket and have the ability to be mounted on a micro- phone stand (not supplied).

It shall be AC powered and have 230 - 115VAC switch on the back and be UL, C-UL, FCC, RoHS, and WEEE compliant.

The R1600 shall have a five year warranty and be called the Williams Sound Corp. PPA R1600.

SLD 072

The SLD 072 receiver sled shall be a sixteen channel wide band 72-76 MHz receiver designed specifically to work with the PPA R1600 powered speaker/receiver. It shall be enclosed in a metal housing 5” x 5” x 1” and weigh 0.62 lb.

It shall have a sixteen channel rotary channel select, rotary on/off audio level control, rotary squelch con- trol, a 75 Ω F-connect antenna output and an RF LED indicator showing when the receiver is receiving an FM signal.

The SLD 072 is designed to slide into the back of the PPA R1600 and shall be locked in place by two thumb screws on the face plate.

The SLD 072 shall have a deviation of ±75 kHz, frequency response 40 - 15 kHz and S/N ratio of 60 dB when used with the PPA T35.

The SLD 072 shall be FCC, RoHS and WEEE compliant.

The receiver shall have a five year warranty and be called the Williams Sound Corp. SLD 072.

*90 days on accessories.

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

	©2008, Williams Sound Corp. MCAT 060C	2