user manual
QLight™ series
Wall brackets are available for most Qlight™ series enclosures in different load ranges according to the weight of the cabinet. Two examples are shown below: the WB-10 wall bracket with a TQ- 230 and the WB-20A with a TQ-310. Wall brackets can be dis-assembled to simplify installation and are supplied with the necessary fixings (except wall fixings). Remove the countersunk screws in the back of the box that correspond to the bolt hole pattern in the speaker plate, and attach it using the bolts provided with the hardware. Mount the wall plate in the desired position using suitable wall fixings. Locate the captive bolt on the speaker plate in the hole provided on the wall plate, position and angle the loudspeaker for optimum room coverage and tighten the nylock nuts.
WB-10/TQ-230 | WB-55A/TQ-310 |
Ceiling brackets are available for the TQ-230, TQ-308, TQ-310 and TQ-315. As with Turbosound wall brackets, they can be dis-assembled to simplify installation and are supplied with the necessary fixings (except wall fixings). Remove the countersunk screws in the back of the box that correspond to the bolt hole pattern in the speaker plate, and attach it using the bolts provided with the hardware. Attach the ceiling plate using suitable fixings. Position and angle the loudspeaker for optimum room coverage and tighten the nylock nuts.