Turbosound LMS-D4 user manual Utilities, Lock/unlock

Page 10

user manual

LMS-D4

Use the ‘NEXT’ and ‘BACK’ keys to navigate through the accessible user controls. Then when the desired control appears on the display, use the the ‘SCROLL’ button to change the value as displayed on the bottom row.

IMPORTANT: Check that the limiter and amplifier settings are correct and that mixer levels are minimised before unmuting the LMS-D4.

Utilities

This menu gives access to three features as indicated below:-

Lock/unlock

Locking the unit will prevent any change of the system in use as well as editing any of the user controls.

To lock the unit, a password of 3 digits has to be entered. Use the ‘NEXT’ and ‘BACK’ keys to move from one digit to the other, and the ‘SCROLL’ button to edit each of the three values. Finally press the ENTER’ key. To unlock the unit, simply follow the same procedure.

Clear User Setups

This stores the factory preset (default) values for the system currently selected. As a result any change previously made to the user controls values will be cancelled.

Download from PC

A standard 9 pin RS-232 type connector is provided to facilitate the future implementation of software downloads and future upgrades. To download new flash memory data this option must be enabled.

LMS-D4 user manual Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents
LMS-D4 LMS-D4 Important Safety Information Unpacking the LMS-D4 Features Introduction Front Panel Functions Rear Panel Functions Outputs are configured as follows System TQ-308 Passive Menu Structure Xover SetupOperating the LMS-D4 System SelectionUtilities Lock/unlockInput Gain Gain = 0.0dBTrim = 0.0dB LF Bass BoostOP1+3 Sub Limiter = +5dBu OP1+3 Sub Mode = StereoSub-bass channels operation mode Peak LimitersOP1+3 Sub Gain = 4.0 dB OP1+3 Sub Delay = 0.000 msOP1+3 Sub Polarity = Normal Store Setup Store SetupSpecifications SizeWarranty LMS-D4
Top Page Image Contents