Turbosound LMS-D4 user manual Store Setup

Page 14

user manual

LMS-D4

Set the signal delay on the specified output channel. The delays can be adjusted in 20.83 uS increments, with a maximum value of 20.7 ms (≡ 7.1 metres) in stereo two way configurations, and 42 ms (≡ 14.4 metres) in mono three way configurations. These delays are provided (their range is large enough) to align the driver components in the time domain – including separate sub-bass cabinets – but will not replace a dedicated delay line unit in applications such as distributed systems.

Please also note that, as with other similar digital processing units, the values displayed are relative and do not take into account the basic processing delay of the unit which is approximately 0.4ms.

When adjusting the delay on bi-amped loudspeakers it is important to ensure the difference between channels remains fixed so that the HF and LF drivers stay aligned.

8) Store Setup

Store Setup

The settings of this particular setup can be saved so that when it is next recalled, the user edited value will return to their preferred settings.

LMS-D4 user manual Page 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents
LMS-D4 LMS-D4 Important Safety Information Unpacking the LMS-D4 Features IntroductionFront Panel Functions Rear Panel Functions Outputs are configured as follows System TQ-308 Passive Menu Structure Xover SetupOperating the LMS-D4 System Selection Utilities Lock/unlockInput Gain Gain = 0.0dBTrim = 0.0dB LF Bass BoostOP1+3 Sub Limiter = +5dBu OP1+3 Sub Mode = StereoSub-bass channels operation mode Peak LimitersOP1+3 Sub Polarity = Normal OP1+3 Sub Delay = 0.000 msOP1+3 Sub Gain = 4.0 dB Store Setup Store SetupSpecifications SizeWarranty LMS-D4
Top Page Image Contents