user manual
LMS-D4
Operating the LMS-D4
With the unit mounted in a rack or cabinet, securely plug in all connections and check especially that the Low (LF or Bass) and High (HF or Top) outputs are connected to the correct amplifiers. It is good practice to switch on the
When you plug the
Menu Structure
The structure includes three
System Selection
This menu allows the selection of a particular loudspeaker system and configures the
To display and go through the available systems, use the ‘SCROLL’ rotary encoder. The system names will appear on the bottom line of the display. Once the desired configuration appears, confirm the selection by pressing ‘ENTER’. Please note that this will cause the outputs to be automatically muted; this is to limit accidental change that could endanger the loudspeaker components. After a system is loaded the limiter settings must be adjusted since the default
setting is ‘OFF’.
Xover Setup
This menu allows you to change the settings of a number of parameters, also refered to as “user controls”. They are detailed in the next section.
Having entered the ‘Xover Setup’ menu, the information displayed will generally include three fields:
1)The top row:- the output channel(s) being refered to.
2)At the left hand side of the bottom row:- the name of the parameter being edited.
3)At the right hand side of the bottom row:- the value of the parameter.
As an exception when the control is not channel related, its description will appear on the top row (e.g. for Bass Boost).