4. Menu Orientation

LOGO Input Setup Menu

ildl=fåéìí=pÉíìé=jÉåì

The figure below illustrates a sample LOGO Input Setup Menu:

 

LOGO INPUT SETUP

 

H

Type

FG_3

O

M

 

 

E

 

 

 

Temp FG3 Info:

 

 

File Name

[ FG3_T ]

 

Resolution

[ 1280 x 1024 ]

S

 

A

 

D

A

 

J

V

 

 

E

 

 

Figure 4-49.LOGO Input Setup Menu (sample)

 

The LOGO Input Setup Menu enables you to select the full screen source for the panel’s LOGO button. Choose between the three internal frame stores, or black. Because the LOGO is the highest priority layer and downstream of all other effects, the “black” source can serve as a convenient way to fade all effects to black — without changing any of the image setups underneath the LOGO.

Note

To access the menu:

On factory reset, “black” is the default LOGO source. If you capture a frame and assign it as the LOGO source, that frame will be the default upon power up.

Press the LOGO button in the Layer Functions Section. The following LOGO Input Setup Menu functions are provided:

Type — enables you to select still frames FG_1, FG_2, FG_3 or Black as the LOGO source. Frames cannot be captured from the Logo Input Setup Menu. Refer to the “Frame Grab Menu” section on page 80 for details.

In the Temp FG Info section:

~File Name — displays the selected still frame’s temporary storage register.

~Resolution — displays the resolution of the selected still frame.

Press {SAVE} to save all LOGO parameters in memory.

82

 

PresentationPRO-II • User’s Guide

 

Page 94
Image 94
Barco 26-0405000-00 manual Ildl=fåéìí=pÉíìé=jÉåì, Figure below illustrates a sample Logo Input Setup Menu