4. Menu Orientation
Input Menu
fåéìí=jÉåì=aÉëÅêáéíáçå
The figure below illustrates a sample Input Menu:
| INPUT MENU | SRC_3 |
| |
H | Format 1024 x 768 @ 59.94 |
|
| |
O |
| N | ||
M |
|
| ||
|
| A | ||
E | Input Type | [ RGB ] | ||
V | ||||
| ||||
C | Color Space | [ RGB ] |
| |
|
|
| ||
F | Sampling Mode | [ 1:1 ] |
| |
G |
| |||
| Contrast < % > | 100.0 |
| |
A | Brightness < % > | 100.0 |
| |
R |
|
|
| |
| Gamma | 1.0 |
| |
S | Input Sync Type | H/V | A | |
A |
|
| D | |
|
| J | ||
V | Pulldown Compensation | On | ||
E |
|
SELECT | SIZING | COLOR | FORCE | |
FORMAT | BALANCE | ACQUIRE | ||
|
Figure 4-3. Input Menu (sample)
The Input Menu is used to adjust all parameters relating to inputs. Using the menu, you can set all of the configuration options for the selected source.
There are several ways to access the menu:
•Press {INPUT} on the Home Menu.
•Press PIP or KEY in the Layer Functions Section, then press an input on the Source Selection Bus and ensure the button is blinking. If the Input Acquisition Menu appears (because the source has not yet been saved, or because video has not been detected), press {INPUT}.
On the Input Menu, the currently selected input is shown in the menu’s upper right corner (e.g., SRC_3). The menu tracks the selected input, thus, if you switch inputs on the Source Selection Bus, the menu is immediately
fåéìí=jÉåì=cìåÅíáçåë
The following Input Menu functions are provided:
•Format — this line performs two functions:
~Displays the resolution that is automatically determined by the FORCE ACQUIRE function.
~Enables you to set the resolution of the incoming source if desired. Once the format is selected manually with the rotary knob, press {SELECT FORMAT} to “accept” the selection.
30 |
|
|
|
