Barco 26-0405000-00 manual MêÉëÉåí~íáçåmolJff=oÉ~ê=m~åÉä, SDI Input, Analog Inputs

2. Hardware Orientation

PresentationPRO-II Rear Panel

mêÉëÉåí~íáçåmolJff=oÉ~ê=m~åÉä

The figure below illustrates the PresentationPRO-II rear panel:

7

	1	2		3	4	5	6
		Figure 2-1.PresentationPRO-II Rear Panel
1)	SDI Input		4)	Program Outputs	7)	Serial Ports
2)	Analog Inputs		5)	Ethernet Port
3)	Background/DSK Input		6)	AC Connector

Following are descriptions of each rear panel connector and section.

1)SDI Input

One BNC connector is provided for an SD-SDI/HD-SDIinput (HD model) or an SD-SDIinput (SDI model). This input is directly associated with the SDI source button on the front panel’s top row.

Users can set the input to accept the following:

~SDI (SMPTE 259M-C, NTSC or PAL). SDI and HD models.

~HD-SDI(SMPTE 292M, HDTV). HD model only.

In Chapter 5, refer to the “Comprehensive Input Setup” section on page 90 for input setup instructions.

2)Analog Inputs

Eight 15-pin D connectors are provided for Analog Inputs. These numbered inputs feed the system’s internal 8 x 1 analog router, and correspond directly to the eight analog source buttons on the front panel.

Please note:

~In Appendix A, refer to the “Analog 15-pin D Connector” section on page 126 for pinout details.

~Refer to the “Analog Input Flexibility” section on page 14 for additional information about each analog input connector.

12 PresentationPRO-II • User’s Guide