Barco 26-0405000-00 manual Fã~ÖÉ=bÑÑÉÅíë=jÉåì, Tip

4. Menu Orientation

PIP Adjustment Menu

•Press {BORDER} to display the Border Menu. Refer to the “Border Menu” section on page 60 for details.

•Press {EFX} to display the Image Effects Menu. Refer to the “Image Effects Menu” section on page 63 for details.

Note

To remove any shadow effects from the PIP or Key, press the RESET button in the Layer Functions Section. No other parameters will be affected.

fã~ÖÉ=bÑÑÉÅíë=jÉåì

From the Border Menu and Matte Menu, press {EFX} to display the Image Effects Menu:

	IMAGE EFFECTS
H	Monochrome Mode	Off
O			N
M
			A
E	Red	100
			V
P	Green	100
I	Blue	100
P
B	Invert	Off
O	Hue	0
R
D
E	- - - - - - STROBE - - - - - -
R
S	Mode	Off	A
H			D
A	Interval (frames)	2	J
D
O
W	RESET
	RGB

Figure 4-34.Image Effects Menu (sample)

The Image Effects Menu enables you to creatively manipulate the selected PIP or Key:

•Monochrome Mode — turns chroma on or off. When the mode is enabled, the image is completely monochrome.

•Red — adjusts the image’s red saturation. Adjustment range is 0 to 100.

•Green — adjusts the image’s green saturation. Adjustment range is 0 to 100.

•Blue — adjusts the image’s blue saturation. Adjustment range is 0 to 100.

Note

Tip

The Red, Green and Blue adjustments function whether or not Monochrome Mode is enabled.

For a sepia tone effect, turn Monochrome Mode on, and set Red to 100, Green to 65 and Blue to 10.

•Invert — enables you to invert all image colors.

PresentationPRO-II • User’s Guide 63