6. Operations
Working with Layers
jçÇáÑóáåÖ=hÉóë=~åÇ=aphë
Use the following steps to modify a Key or DSK:
SAssumption: A Key (or DSK) is currently on Program.
1.Use one of two methods to access the key adjustment menus:
~For a Key — In the Layer Functions Section, press KEY to activate the current Key for modification. The Key Menu appears.
~For a DSK — Press BG/DSK to display the BG/DSK Input Setup Menu appears. Then press {KEY} to display the DSK Adjustment Menu.
2.Clip, Gain, Mode, Opacity — Use the controls to adjust clip, gain, invert mode and opacity. In Chapter 4:
~Refer to the "Key Menu Description" section on page 66.
~Refer to the "DSK Adjustment Menu" section on page 78.
Note | Because the Key is on Program, it is recommended that you |
| make slow, smooth adjustments during a live production. |
|
|
3.Fill Source — Use the controls in the Key Menu to select a self or matte fill key. If Matte is selected, press {MATTE} to display the Matte Menu, with which you can choose the matte fill color. In Chapter 4, refer to the "Matte Menu" section on page 68 for menu details.
S For a Key only:
4.Size and Position — From the Key Menu, press {SIZE & POS} to display the Key Adjustment Menu. Use the controls to size and position the Key. In Chapter 4, see the "Key Adjustment Menu" section on page 69 for menu details.
5.Crop — From the Key Menu, press {CROP} to display the Crop Adjustment Menu. Use the menu to select the type of crop, the aspect ratio, and the image’s H and V size. In Chapter 4, refer to the "Crop Menu" section on page 61 for menu details.
6.Source Size — From the Crop Menu, press {SRC} to display the Key Source Adjustment Menu. Use the menu to adjust the source image’s size and position within the PIP. In Chapter 4, refer to the "Input Source Adjustment Menu Description" section on page 72 for menu details.
7.Special Effects — From the Matte Menu, press {EFX} to display the Image Effects Menu. Use the menu to select monochrome or color mode, to modify chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer to the "Image Effects Menu" section on page 63 for menu details.
8.Global Functions — Remember that the following global functions are always available to you:
~Press Reset to reset the current effect to a default value.
~(For a Key only) Press Full Screen to bring the Key to full screen, using the source’s height as the defining factor.
~Press Freeze to freeze the Key. Press again to unfreeze.
S For a Key and a DSK:
9.Transition — Transition the new "look" to program with a MIX or WIPE. Refer to the “Working with Transitions“ section on page 115 for details.
|
| 107 |
|
