Barco 26-0405000-00 rëáåÖ=~=j~ííÉ=`çäçê=~ë=íÜÉ=~ÅâÖêçìåÇ, rëáåÖ=íÜÉ=asf=fåéìí=~ë=íÜÉ=~ÅâÖêçìåÇ

5. System Setup

Setting up the Background

rëáåÖ=~=j~ííÉ=`çäçê=~ë=íÜÉ=_~ÅâÖêçìåÇ

This procedure enables you to set up the background as a matte color that can be used behind a PIP or Key.

„Use the following steps to set up a solid matte color as a background source:

1.(Optional) To ensure that the full background is visible, clear any PIP, Key or LOGO from Program.

2.In the Layer Functions Section, press BG/DSK. The button blinks and the BG/ DSK Input Setup Menu appears.

3.Scroll to the Mode line and select BG.

4.Scroll to the Type line and select MATTE.

5.Press {MATTE} to display the Background Matte Menu.

6.Adjust the Red, Green and Blue values as desired. At this point, the selected color is the new background that you can use behind PIPs and Keys.

7.Press {BACK} to return to the BG/DSK Input Setup Menu.

8.Press {SAVE} to save the background input configuration.

rëáåÖ=íÜÉ=asf=fåéìí=~ë=íÜÉ=_~ÅâÖêçìåÇ

This procedure enables you to set up the DVI source as the background layer. The DVI source originates from an external computer or other external device.

It is recommended that you perform these steps as a setup procedure. However, once the DVI input is set, during live production you can switch the background between a Matte color, a still frame and a DVI source.

Please remember that the BG/DSK input is shared between BG and DSK. If you elect to use a live DVI input as the background, it cannot be used as the DSK simultaneously.

„Use the following steps to set up a DVI input as a background:

1.(Optional) To ensure that the full background is visible, clear any PIP, Key, or LOGO from Program.

2.Ensure that the PresentationPRO-II EDID is properly programmed. Refer to the “Programming EDID” section on page 93 for instructions.

3.In the Layer Functions Section, press BG/DSK. The button blinks and the BG/ DSK Input Setup Menu appears.

4.Scroll to the Mode line and select BG.

5.Scroll to the Type line and select DVI.

6.If required, press {FORCE ACQUIRE} to force the system to perform the optimum setup on the DVI input. If the operation is successful, Format and Type should correctly reflect the characteristics of the incoming signal.

7.If required, scroll to the Format line and manually set the resolution of the incoming source. In Appendix A, refer to the “Input and Output Resolutions“ section on page 129 for details on all available resolutions.

8.If you manually selected a format in the previous step, press {SELECT FORMAT} to “accept” and activate the selection.

94 PresentationPRO-II • User’s Guide