Barco 26-0405000-00 manual OÉãçíÉ=`çåíêçä=jÉåì, Remote Control

4. Menu Orientation

Remote Control Menu

oÉãçíÉ=`çåíêçä=jÉåì

The figure below illustrates a sample Remote Control Menu:

	REMOTE CONTROL
H	Unit ID	[ 1 ]	N
O
M	Remote Control	[ Off ]	A
E			V
	Unit IP: 192.168.0.10
	- - - - - STATUS - - - - -
	No Connection
	Ctrlr IP:	[ N/A ]
	Destination	[ Undefined ]
	Router	[ Internal ]	A
			D
			J
	SAVE
Figure 4-50.Remote Control Menu (sample)

The Remote Control Menu serves two purposes:

•When using PresentationPRO-II on a standalone basis, the Remote Control Menu is used to set communications parameters for downloading software updates via Ethernet.

•When PresentationPRO-II is controlled from an external controller, the Remote Control Menu is used to set the unit ID and enable/disable remote control itself.

To access the menu:

•Press {REMOTE CONTROL} on the Home Menu. The following functions are provided:

•Unit ID — When PresentationPRO-II is controlled from an external controller, this function sets the ID of the PresentationPRO-II chassis. The ID range is 1 to 32.

Important

Some external controllers will detect multiple IDs and prompt the user to correct the problem. Only the first device will connect to the console. Other devices with conflicting IDs will be refused a connection.

PresentationPRO-II • User’s Guide 83