
5. System Setup
Setting up the DSK
pÉííáåÖ=ìé=íÜÉ=aph
With
Note
Remember that the BG/DSK input is shared between BG and DSK. If you elect to use a “live” DVI input as the background, it cannot be used as the DSK simultaneously.
Select the procedure below for the type of DSK that you wish to set up:
•Using the DVI Input as the DSK
•Using a Still Frame as the DSK
rëáåÖ=íÜÉ=asf=fåéìí=~ë=íÜÉ=aph
This procedure enables you to set up the DVI source as the DSK’s input type. It is recommended that you perform these steps as a setup procedure. However, once the DSK is set up, during live production you can switch it between a captured still frame and the DVI source.
Use the following steps to set up the DVI input as your DSK source:
1.Ensure that the
2.If you have not already set up the BG/DSK input as a DVI source, follow the setup procedure as outlined in the “Using the DVI Input as the Background” section on page 94.
3.In the Layer Functions Section, press BG/DSK. The button blinks and the BG/ DSK Input Setup Menu appears.
4.Scroll to the Mode line and select DSK.
5.Scroll to the Type line and select DVI.
6.Press {KEY} to display the DSK Adjustment Menu.
7.Adjust key parameters as required. In Chapter 4, refer to the “DSK Adjustment Menu” section on page 78 for details.
96 |
|
|
|