`K==réÖê~ÇáåÖ=pçÑíï~êÉ

Ethernet Upgrade Method

19.To connect to the PresentationPRO-II serial port:

a.Click Start > Programs > Accessories > Communications > HyperTerminal to launch the HyperTerminal application.

b.In the Connection Description dialog, enter a connection name, choose an icon, and click OK.

c.In the Connect To dialog, click the Connect using pull-down menu, and choose COM 1.

d.Click OK to display the COM 1 Properties dialog.

e.Select the following settings:

Baud Rate = 115200

Data Bits = 8

Parity = NONE

Stop Bits = 1

20.In the terminal window, ensure that the # prompt is displayed, then type:

LOADR

.... and wait a few seconds for the > prompt.

21.In the terminal window, type:

DHCP 0

You might have to wait 10 seconds, until it binds to 192.168.0.10.

22.On the PC, click Start > Programs > Barco Folsom > PresentationPRO-II Software > PresentationPRO-II Flash Loader to launch the Flash Loader utility, as shown below.

Figure C-8.Flash Loader Utility

PresentationPRO-II • User’s Guide

 

143

 

Page 155
Image 155
Barco 26-0405000-00 manual Dhcp, PresentationPRO-II User’s Guide 143