
4. Menu Orientation
Frame Grab Menu
To access the Frame Grab Menu, use one of the following methods:
•Press {FRAME GRAB} from the BG/DSK Input Setup Menu, when “Type” is set to DVI (in both the BG and DSK modes).
•Press {FRAME GRAB} from the Home Menu.
Note
The top line of the menu will change accordingly, depending on the access path.
The following Frame Grab Menu functions are provided:
•FG to Capture — enables you to select FG_1, FG_2 or FG_3 for capture.
•Capture Format — displays the output resolution.
•In the Temp FG Info section:
~File Name — displays the name of the file in “temp” memory.
•The “_T” in the filename indicates that the file’s source is temporary memory.
•The “_P” in the filename indicates that the file is permanently stored. If this indication appears, the permanent file has been read into “temp” memory for use
~Format — displays the resolution of the captured frame.
•In the Perm FG Info section:
~File Name — displays the name of the file in permanent memory.
•The “_P” indicates that the file is permanently stored.
•[EMPTY] indicates that no frame is stored.
~Format — displays the resolution of the permanent frame.
•Press {CAPTURE} to capture a still into the selected frame store. Once pressed, the screen will indicate that the frame is being captured.
•Press {SAVE} to save the captured frame into permanent memory (FG_1, FG_2 or FG_3). Once pressed, the screen will display a warning:
System controls will be locked for 2 to 3 minutes while saving.
Save Now?
Figure 4-48. Background Frame Save Warning
~Press YES to save the frame. All front panel controls will be locked for up to three minutes.
~Press NO to cancel the procedure.
•Press {DELETE} to delete the selected frame from permanent storage. This button only appears when frames are stored in permanent memory.
|
| 81 |
|