Barco 26-0405000-00 manual MêÉëÉåí~íáçåmolJff=cêçåí=m~åÉä

2. Hardware Orientation

PresentationPRO-II Front Panel

mêÉëÉåí~íáçåmolJff=cêçåí=m~åÉä

The figure below illustrates the PresentationPRO-II front panel:

1 3 4

	2
						5
		Figure 2-1.PresentationPRO-II Front Panel
1)	Chassis Handles		3)	Layer Functions Section	5)	PresentationPRO-II Model
2)	Touch Screen Menu Section		4)	Source Selection Bus

Following are descriptions of each front panel control feature:

1)Chassis Handles

Two Chassis Handles are provided for ease of installation and transportation.

2)Touch Screen Menu Section

The Touch Screen Menu Section is used for system configuration, setup and operational adjustments of PIPs and keys. Refer to the “Touch Screen Menu Section” heading on page 17 for details.

3)Layer Functions Section

The Layer Functions Section is the operational heart of the PresentationPRO-II, enabling you to select layers, modes, and perform transitions. Refer to the “Layer Functions Section” heading on page 19 for details.

4)Source Selection Bus

The Source Selection Bus allows you to choose the PIP or Key source.

~On the SDI model, up to eight analog sources plus one SD-SDI source can be routed to the PIP or Key.

~On the HD model, up to eight analog sources plus one HD-SDI/SD-SDI source can be routed to the PIP or Key.

Refer to the “Source Selection Bus” section on page 18 for details.

5)PresentationPRO-II Model

This section displays the PresentationPRO-II model, either SDI or HD.

H D -S D I

S D I

Figure 2-2.PresentationPRO-II Model Labels

PresentationPRO-II • User’s Guide 15