Barco 26-0405000-00 manual bíÜÉêåÉí=réÖê~ÇÉ=jÉíÜçÇ, `K==réÖê~ÇáåÖ=pçÑíï~êÉ

`K==réÖê~ÇáåÖ=pçÑíï~êÉ

Ethernet Upgrade Method

13.It takes approximately 6 minutes to load the flash memory using the Serial method. When complete, the Flash Loader utility displays the “Upload Complete” message. Click OK to continue.

14.Cycle power on the PresentationPRO-II unit, and exit the Flash Loader utility.

15.On PresentationPRO-II, perform a factory reset.

Warning

Use caution when performing this step, as all saved files and saved still frames will be erased.

a.From the Home Menu, press {SYSTEM} to access the System Menu.

b.From the System Menu, press {RESET} to display the Reset Menu.

c.On the Reset Type line, select FACTORY.

d.Press {RESET}. When the confirmation screen appears, press {YES} to reset the system to factory default values.

16.On PresentationPRO-II, verify that the new software has been loaded correctly:

a.From the Home Menu, press {SYSTEM} to access the System Menu.

b.From the System Menu, press {SW VER} to display the Software Version Menu, then verify the new version.

bíÜÉêåÉí=réÖê~ÇÉ=jÉíÜçÇ

„Use the following steps to upgrade PresentationPRO-II software using an Ethernet connection to your PC:

1.Ensure that your PC (or laptop) uses the Windows® 2000 or XP operating systems.

2.Ensure that your PC (or laptop) has RS-232 Serial Terminal software installed, such as HyperTerminal. This software enables the PC to send serial commands to the PresentationPRO-II unit.

3.Please note the following important points:

~Do not connect PresentationPRO-II to a Local Area Network (LAN) with an existing DHCP server running.

~The factory default IP address for the PresentationPRO-II system is 192.168.0.10, so the PC will use 192.168.0.191 as its IP address.

4.Download the latest PresentationPRO-II firmware update from the web:

a.On the web, navigate to http://video.folsom.com.

b.Click “Downloads” to access the Downloads Page.

c.Using the “Select Video Product” pull-down menu, click PresentationPRO-II.

d.In the “Software” section, click the Download button for the latest version of code.

e.When the File Download Dialog appears, click Save to save the file to your computer.

PresentationPRO-II • User’s Guide 139