Barco 26-0405000-00 lìíéìí=jÉåì=aÉëÅêáéíáçå, lìíéìí=jÉåì=cìåÅíáçåë, Menu Orientation, Format

4. Menu Orientation

Output Menu

lìíéìí=jÉåì=aÉëÅêáéíáçå

The figure below illustrates a sample Output Menu:

H O M E

S A V E

	OUTPUT MENU
Format	1024x768 @ 59.94
Color Space	[ RGB ]

Press SELECT FORMAT to select the output resolution.

DVI EDID format can be adjusted to match the output format in

The HOME > SYSTEM > EDID menu.

SELECT	SETTINGS	TEST
FORMAT		PATTERN

N A V

A D J

Figure 4-12.Output Menu (sample)

The Output Menu enables you to configure PresentationPRO-II’s outputs, including the ability to show test patterns. To access the menu:

•Press {OUTPUT} on the Home Menu.

On the menu, note that brief “help” messages are displayed to assist you with format selection and EDID programming.

lìíéìí=jÉåì=cìåÅíáçåë

The following Output Menu functions are provided:

•Format — sets the resolution and frame rate at which you want to drive your projector. To minimize synchronization problems, select a frame rate that is consistent with your input sources.

S Example: If you are using 59.94 NTSC video inputs, run the output at the same rate in order to reduce jutter artifacts.

After selecting a format with the rotary knob, press {SELECT FORMAT} to “accept” the selection. In Appendix A, refer to the “Input and Output Resolutions“ section for details on all available resolutions.

•Color Space — displays the output color space, which is fixed at RGB.

•Press {SAVE} to save all output settings in the output file.

•Press {SELECT FORMAT} to “accept” an output format. In Appendix A, see the “Input and Output Resolutions“ section for details on available resolutions.

•Press {SETTINGS} to display the Settings Menu. Refer to the “Settings Menu” section on page 41 for details.

•Press {TEST PATTERN} to display the Test Pattern Menu. Refer to the “Test Pattern Menu” section on page 42 for details.

40 PresentationPRO-II • User’s Guide