Barco 26-0405000-00 manual ~ÑÉíó=mêÉÅ~ìíáçåë=, Råé~ÅâáåÖ=~åÇ=fåëéÉÅíáçå=, PáíÉ=mêÉé~ê~íáçå=

3. Hardware Installation

Safety Precautions

p~ÑÉíó=mêÉÅ~ìíáçåë=

For all PresentationPRO-II installation procedures, please observe the following important safety and handling rules to avoid damage to yourself and the equipment:

•To protect users from electric shock, ensure that the chassis connects to earth via the ground wire provided in the AC power Cord.

•The AC Socket-outlet should be installed near the equipment and be easily accessible.

råé~ÅâáåÖ=~åÇ=fåëéÉÅíáçå=

Before opening the PresentationPRO-II shipping box, inspect it for damage. If you find any damage, notify the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents against the packing slip. If you find any shortages, contact your sales representative.

Once you have removed all the components from their packaging and checked that all the listed components are present, visually inspect the system to ensure there was no damage during shipping. If there is damage, notify the shipping carrier immediately for all claims adjustments.

páíÉ=mêÉé~ê~íáçå=

The environment in which you install your PresentationPRO-II should be clean, properly lit, free from static, and have adequate power, ventilation, and space for all components.

o~ÅâJjçìåí=fåëí~ää~íáçå

The PresentationPRO-II chassis is designed to be rack mounted and is supplied with front rack-mount hardware. Rear rack-mount brackets are available as a kit and are recommended for use when units are mounted in transit cases.

Note

The PresentationPRO-II chassis can also be used in a “tabletop” configuration, without rack mounting.

When rack mounting the PresentationPRO-II chassis, remember the following important points:

•Maximum ambient operating temperature for the unit is 40 degrees C.

•Leave at least one inch of space (front and rear) to ensure that the airflow through the fan and vent holes is not restricted.

•When installing multiple units into a rack, distribute them evenly to prevent hazardous conditions that may be created by uneven weight distribution.

22 PresentationPRO-II • User’s Guide