Barco 26-0405000-00 mfm=ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå, mfm=ÇàìëíãÉåí=jÉåì=cìåÅíáçåë, H Size 37.3%

4. Menu Orientation

PIP Adjustment Menu

mfm=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå

The figure below illustrates a sample PIP Adjustment Menu:

H O M E

S R C

B O R D E R

C R O P

PIP ADJUSTMENT

H Size < 37.3% >	674
V Size < 58.9% >	452
H Position	-34
V Position	70

3 TRACK SIZE

N A V

A D J

Figure 4-30.PIP Adjustment Menu (sample)

The PIP Adjustment Menu provides tools that enable you to adjust the active PIP. To access the menu:

•Press the PIP button in the Layer Function Section. The menu will immediately appear on the Touch Screen display.

Note

If you select a source button and both the PIP and KEY buttons are off, the system displays a brief prompt: “PIP or KEY must be selected.”

mfm=^ÇàìëíãÉåí=jÉåì=cìåÅíáçåë

The following PIP Adjustment Menu functions are provided:

•H Size — adjusts the PIP’s horizontal size. The “%” value indicates the PIP’s size as a percentage of the screen’s horizontal resolution. The numeric value is the PIP’s width in pixels.

•V Size — adjusts the PIP’s vertical size. The “%” value indicates the PIP’s size as a percentage of the screen’s vertical resolution. The numeric value is the PIP’s height in pixels.

•H Position — indicates the PIP’s position, relative to the horizontal center of the screen (00), as measured from the exact center of the PIP. Thus, the value -34is 34 pixels to the left of center.

•V Position — indicates the PIP’s position, relative to the vertical center of the screen (00), as measured from the exact center of the PIP. Thus, the value 70 is 70 pixels above center.

58 PresentationPRO-II • User’s Guide